background image

2

3

  Battery Installation and Information

Your universal remote requires two AA Alkaline batteries (batteries may or may not be included, 
depending on model). To install the batteries:

Congratulations on your purchase of this advanced universal remote, which has the capacity to control 
multiple components. You can program your RCA brand universal remote to operate most models of 
most brands of infrared, remote-controlled components manufactured after 1990. 
(See the enclosed Code Lists for a complete list of brands.) 

 

Your universal remote is already programmed to operate most RCA, GE and PROSCAN 

branded TVs, VCRs, DVD players and satellite receivers. Just press the corresponding key–

DVD

 key for 

a DVD player; 

TV

 key for a television; 

SAT·CBL

 for a satellite receiver or a cable box; etc.

 Table of Contents

Universal Remote 

TIP:

Your universal remote control saves battery power by automatically turning off if any key is pressed 
for more than 60 seconds.

 Battery Saver

Backlight illumination (available on select models only) enables you to see 
the remote control keys better in the dark. Backlight illumination is toggled 
on or off with successive keypresses of the 

LIGHT

 key. When toggled on, the 

backlighting remains on as long as keys are being pressed. The backlighting 
turns off six seconds after the last keypress. Once the backlight time has 
expired, any keypress reactivates backlighting. If the backlight illumination is 
on, and the 

LIGHT

 key is pressed, the backlight turns off. 

 Backlighting

 Illuminated ON·OFF Key 

Double Off Function

The 

ON·OFF

 key powers components on and off. It also lights up to serve 

as an indicator light, providing feedback for various functions. When a valid 
key is pressed, the illuminated 

ON·OFF

 key remains lit as long as the key is 

pressed and turns off when the key is released. The 

ON·OFF 

key also blinks in 

Programming mode or in Menu mode to provide feedback. 

The Double Off function transmits a sequence of POWER OFF commands to turn off all RCA 
components. This feature is specific to RCA products and does not work with other brands. To activate 
this feature, press the illuminated 

ON·OFF

 key twice within a two-second window. At the second 

keypress, all RCA components turn off.

Product Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Battery Installation and Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Battery Saver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Illuminated 

ON·OFF

 Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

Double Off Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Programming the Remote  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Programming Methods  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
 

Brand Code Search and Entry  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

 

Direct Code Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

 Programming 

the 

AUX

 or 

DVR·AUX

 Key  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

 

Manual Code Search and Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

 

Testing the Code for Maximum Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

 

Auto Code Search and Entry  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

Code Retrieval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Using the Remote to Control Your Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Volume Punch Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
 

Advanced Volume Punch Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Transport Key Punch Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Sleep Timer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
 

Programming the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Learning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
 

Learning Tips  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

 

Code Learning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

 

Learning Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

 

Master Clear  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

Macro Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
 

Program a Macro  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

 

Execute a Macro  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

 

Delete a Macro  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

1.  Remove the battery compartment cover.

2.  Insert the batteries, matching the batteries to the (+) and (-) marks inside the 

battery compartment.

3.  Press and push the battery cover back into place.

Note:

 Reprogramming may be required after batteries are replaced. 

Actual model may vary from picture shown.

Component Keys (

SAT·CBL, 

VCR, DVD, TV, AUX·1, AUDIO, 
DVR, AUX·2

LIGHT

 Key – Turns backlighting 

on/off (select models only).

Illuminated 

ON·OFF

 Key – 

Serves as an indicator light to 
provide feedback.

Transport Keys – 

REVERSE, 

PLAY, FORWARD, RECORD, 
STOP

 and 

PAUSE

 Keys

CH

 and 

VOL

 keys have dual 

functions. They act as navigation 
keys (

UP, DN, RT, LT ARROW

 

keys) in menu systems.

NAVIGATION

 Keys navigate 

through menus for DVDs, satellite 
receivers and some TVs.

SELECT/OK

 Key – Selects your 

menu choices.

Dedicated 

MENU

 Key for DVD 

disc menus, satellite receivers and 
some TVs.

SLEEP

 Key - Allows you to 

set a time to turn off your TV 
automatically.

INPUT

 Key – Toggles through all 

the video sources connected to 
your TV, when the remote is in TV 
mode. When the remote is in VCR 
mode, it toggles between VCR 
and TV input.

INFO

 key – Displays information 

pertaining to the component you 
are currently controlling.

MACRO

 Key Plus Digit Keys 

1-6 – Enable you to store and 
execute Macros.

RCR615ƒ.indd   2-3

RCR615ƒ.indd   2-3

3/4/05   11:39:02 AM

3/4/05   11:39:02 AM

Summary of Contents for RCR615
























Reviews: