RCA RCU310, User Manual

4

Other Keys (listed alphabetically)

0-9 

(Number Keys)

:

operate the same as number keys on your

original remote and are used to enter component codes when
programming the remote control with Direct Entry method.

ANTENNA:

in TV mode, switches between the signal coming

from a satellite receiver or cable box and an off-air antenna.
In VCR mode, switches between the signal coming from a
VCR and a TV.

CHAN 

(Channel)

UP AND DOWN:

goes to the next highest 

or lowest channel number in the component channel list,
respectively, except for DVDs. In DVDs the 

CHAN UP/DOWN

goes to the 

NEXT/PREVIOUS

chapter. Additionally, when

you’re using the remote with On-screen Menus, the 

CHAN

keys act as 

UP ARROW

and 

DOWN ARROW

keys (moving

the cursor or highlight up or down).

CODE SEARCH:

use to program the remote. 

ENTER:

use with Manual or Automatic Code Search method

to accept code (See Code Search on page 8). Also, some
brands require you to press the 

ENTER

key after you enter 

a channel number. In some menu systems, you must press

ENTER

to select a highlighted item.

MENU:

accesses DVD disc menus when 

VCR•DVD

key 

is programmed to operate a DVD player. Accesses menu
systems of some TVs, a few RCA brand VCRs and satellite
receivers. (For more information, refer to Using On-screen
Menus section on page 10).

MUTE: 

lowers the TV’s volume to its minimum level.

ON•OFF:

turns component on and off.

Note:

Some RCA, GE and PROSCAN models require that

you press the component key to turn ON the component 
and the 

ON•OFF

key to turn OFF the component.

PREV CH 

(Previous Channel)

:

switches back to previous

channel—operates the same as 

LAST CHANNEL

, 

GO BACK

or 

RECALL

key found on some brands of remote controls.

REC 

(Record)

:

used with VCR to record programming. 

You must press the 

REC

key twice to start recording.

VOL

(Volume) 

UP

and 

DOWN

: 

increases or decreases the 

TV’s volume level. Additionally, when you’re using the remote
with On-screen Menus, the 

VOL

keys act as 

RIGHT

or 

LEFT

ARROW

keys (moving the highlight or cursor right or left).

RCU310_US_IB_REVB  4/10/03  16:43  Page 4