RCA RCU410MSL, User Manual

(BLINK)

(BLINK)

Programming With Code Search

1. Turn on the device you wish 

to program.

2. Press and hold 

CODE SEARCH

until the

INDICATOR LIGHT

lights, then release 

CODE

SEARCH.

3. Press and release the device 

button for the device you are
programming (

TV, VCR 

or

CABLE

). The 

INDICATOR

LIGHT

will blink once then

remain lit.

Note: For AUX, press 

SAT•AUX

then 

the device button you are 
assigning to AUX.

4. Press and release 

ON•OFF 

until

your device turns off.

Important:

You may have to press 

ON•OFF 

up to 200 times.

5. When your device turns off,

press the 

ENTER 

button, the

INDICATOR LIGHT

will go off.

If your TV, VCR, or Cable Box does not respond after you have
tried all the codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.

Retrieving Codes

1. Press and hold 

CODE SEARCH

until the

INDICATOR LIGHT

lights, then release 

CODE

SEARCH.

2. Press and release the device

button for the device’s code

you are retrieving (

TV, VCR 

or

CABLE

). The 

INDICATOR

LIGHT

will blink once then

remain lit.

3. Press and release 

CODE

SEARCH

. The

INDICATOR

LIGHT 

will blink, then stay on.

4. Starting with 

0

on the keypad,

press the number buttons in

order (

0-9

) until the

INDICATOR LIGHT 

blinks.

5. The number which causes the

INDICATOR LIGHT

to blink is

the first digit of your code.

6. Repeat step 4 until you have

retrieved all three numbers in

the code.  The light will now

go out. 

If you need to find the three-digit code for your TV, VCR or 
Cable Box after your device is set-up using Code Search, use 
this procedure.

…

(OFF)

INDICATOR

LIGHT

The Menu is used to make changes such
as setting color, channels, timers, etc.

Entering the Menu Mode:

1. Push the 

DEVICE

button on the

remote.

2.  Push the 

MENU

button.

This puts the remote in Menu Mode.
The Menu should now be visible on
the television. The 

INDICATOR LIGHT

will blink continuously to indicate the
remote is now in Menu Mode.

While in

MENU

these buttons will 

function as follows:

VOL UP/DOWN

buttons will 

operate as 

CURSOR RIGHT/LEFT

. 

CH+/-

keys will operate as 

CURSOR 

UP/DOWN

.

For RCA, GE an ProScan, pushing the

MENU

button will select the highlighted

item. The numeric buttons may also be
used to select the 

MENU

choice.

Note:  Not all functions in competitive models and 

brands of televisions may be fully supported.

Exiting the Menu Mode:

To exit the Menu Mode and clear the
screen push the 

DEVICE 

button on the

remote. The 

INDICATOR LIGHT

should go out indicating the remote is
now out of Menu Mode and will
revert to it’s normal mode of 
operation.

Note:

The remote will  automatically exit the 
Menu Mode after 10 seconds of inactivity 
with no buttons being pushed.

Special notes:
1.Because of the wide variety of menu 

formats, some experimenting may be 
required.

2.SONY: Pressing the 

ENTER

button while

in menu mode returns to 
previous menu.

3. ZENITH: Push the menu button a 

second time to move from 
the 

SET-UP MENU 

to the 

VIDEO MENU.

(BLINK)

Menu Functions

13

CODE

SEARCH

CODE

SEARCH

14

(BLINK)

(BLINK)

INDICATOR

LIGHT

CODE

SEARCH

RCU410MSL_IB  10/4/01  1:57 PM  Page 14