background image

6

Program for VCR—
Direct Entry Method

1. Manually turn on the VCR. 
2. Locate the enclosed VCR Code List.

Find your brand of VCR.

Note:

If your brand isn’t listed, use one

of the Code Search methods to program
this remote control

(See

Code Search

on page 9).

3. Press and hold the 

CODE SEARCH

key for approximately three seconds
until all four component keys light up.
Then release the 

CODE SEARCH

key.

4. Press and release the 

VCR

key. 

The 

VCR

key remains lit.

5. Use the number keys on the remote to

enter the first code listed for your brand.
After you enter a valid 3-digit code,
the component key light turns off.

Note:

If you enter an invalid code, 

the lighted component key will flash
rapidly. Start over at step 3. 

6. Aim the remote at the VCR. Press 

the 

ON•OFF

key. If your VCR turns

off, you have found the correct code.

7. Enter the code in the box provided

on this page for future reference.

8. If your VCR doesn’t turn off, repeat

steps 3-6 above, entering the next
code for your brand.

If none of the codes work or your
brand is not listed, use one of the 
Code Search methods to program this
remote (See Code Search on page 9).

For a description of each key on 
the remote control, refer to the Key
Descriptions section on page 3-4.

In order for the four component universal remote to control
your VCR, you must program it with the code that matches
your VCR. These instructions explain the preferred method
of programming the remote—the Direct Entry method.

ON•OFF

1

2

3

4

5

6

7

8

9

0

VCR CODE

CODE

SEARCH

RCU450_US_IB_REVA  10/22/03  9:02  Page 6

Summary of Contents for RCU450

















Reviews: