background image

DVD•AUX CODE

8

Program for DVD•AUX—
Direct Entry Method

In order for the four component universal remote to control 
your DVD player or auxiliary component, you must program 
it with the code that matches your component. The 

DVD•AUX

key

can be programmed to operate a DVD player or a second TV,
VCR, DBS or cable box. These instructions explain the preferred
method of programming the remote—the Direct Entry method.

ON•OFF

1

2

3

4

5

6

7

8

9

0

1. Manually turn on the component you

wish to assign to the 

DVD•AUX

key (TV,

VCR, DVD, DBS System or Cable Box). 

2.

Locate the enclosed DVD code list, or the
corresponding code list for the auxiliary
component (TV, VCR, DBS, or cable box).

Note:

If your brand isn’t listed, use one of

the Code Search methods to program this
remote control

(See

Code Search on page 9).

3. Press and hold the 

CODE SEARCH

key approximately three seconds until
all four component keys light up. Then
release the 

CODE SEARCH

key.

4. Press and release the 

DVD•AUX

key.

The 

DVD•AUX

key remains lit. 

5. To program for DVD, press the 

VCR

key. For an auxiliary component,

press the corresponding component
key (

TV

VCR

DBS

CABLE

).

The 

DVD•AUX 

key will blink, then 

remain lit.

6. Use the number keys on the remote 

to enter the first code listed for 
your brand. 

After you enter a valid 3-digit code, 
the component key light turns off. 

Note: 

If you enter an invalid code, 

the lighted component key will flash 
rapidly. Start over at step 3.

7. Aim the remote at your component 

and press the 

ON•OFF

key. If your

component turns off, you have found
the correct code.

8. Enter the code in the box provided

on this page for future reference.

9. If your component doesn’t turn off,

repeat steps 3-7 above, entering the 
next code for your brand.

If none of the codes work or your 
brand is not listed, use one of the 
Code Search methods to program this
remote (See Code Search on page 9).
For a description of each key on 
the remote control, refer to the Key
Descriptions section page 3-4.

TV

VCR CABLE DBS

DVD

CODE

SEARCH

RCU450_US_IB_REVA  10/22/03  9:02  Page 8

Summary of Contents for RCU450

















Reviews: