RCA RCU600, User Manual

1. Manually turn on the CABLE box.

2. Locate the enclosed CABLE box Code List. Find your brand 

in the CABLE box Codes.

Note

: If your brand isn’t listed, use one of the Code Search

methods to program this remote control. (See section on Code
Search on page 10).

3. Press and hold the 

CODE SEARCH

key until the indicator 

light illuminates. Then release the 

CODE SEARCH

key.

4. Press and release the 

CABLE

key. The indicator light blinks 

and then remains lit.

5. Use the number keys on the remote to enter the first code

listed for your brand. After you enter a valid three-digit code,
the indicator light turns off.

Note

: If you enter an invalid code, the LED flashes rapidly 

for two seconds. Start over at step 3.

6. Aim the remote at the CABLE box. Press the 

ON•OFF

key. 

If your CABLE box turns off, you have found the correct code.

7. Enter the code in the box provided on this page for 

future reference.

8. If your CABLE box does not turn off, repeat steps 3-6 above,

entering the next code for your brand. 

If none of the codes work or your brand is not listed, use 
one of the Code Search methods to program this remote. 
(See Code Search section on page 10).

Program for CABLE Box—Direct Entry Method

In order for the six-component universal remote to control your CABLE box, you must program 
it with the code that matches your CABLE box. To program your remote to control your CABLE box,
follow these steps:

Program for AUDIO Systems—Direct Entry Method

8

This remote control will operate many features found in AUDIO systems. 
To program your remote to control your audio component, follow these steps:

Note:

CD systems need to be programmed using the 

DVD component key.

1. Manually turn on the AUDIO component you wish to control.

2. Locate the enclosed AUDIO system Code List. 

Find your brand in the AUDIO Codes.

Note

: If your brand isn’t listed, use one of the Code Search

methods to program this remote control. (See section on 
Code Search on page 10).

3. Press and hold the 

CODE SEARCH

key until the indicator 

light illuminates. Then release the 

CODE SEARCH

key.

4. Press and release the 

AUDIO

key. The indicator light blinks 

and then remains lit.

5. Use the number keys on the remote to enter the first code 

listed for your brand. After you enter a valid three-digit code,
the indicator light turns off.

Note

: If you enter an invalid code, the LED flashes rapidly 

for two seconds. Start over at step 3.

(BLINK)

CABLE BOX CODE

(BLINK)

CODE

SEARCH

INDICATOR

LIGHT

CODE

SEARCH

INDICATOR

LIGHT

(OFF)

(OFF)

ON•OFF

CABLE

AUDIO

RCU600WMS_IB.qxd  6/5/03  16:55  Page 8