4
Other Keys (Listed Alphabetically)
Certain keys on the six-component universal remote
have dual functions. Primary functions are printed in
black. Secondary key functions are printed in blue on
the remote and are used for AUDIO operations.
0-9
(Number Keys)
:
operate the same as number keys
on your original remote and are used to enter component
codes when programming the remote control with
Direct Entry method.
ANTENNA:
in TV Mode, switches between the signal
coming from a satellite receiver or cable box and an
off-air antenna. In VCR Mode, switches between the
signal coming from a VCR and a TV.
CH+
and
CH-
(
CHANNEL UP
and
CHANNEL DOWN
)
:
goes to the next highest or lowest channel number in
the component channel list, respectively, except for
DVDs. In DVDs, the
CH+
and
CH-
keys refers to the
NEXT/PREVIOUS
chapter.
CLEAR:
removes the on-screen display to return
to normal viewing.
CODE SEARCH:
use to program the remote.
ENTER:
use with Manual or Automatic Code Search
method to accept code (See Code Lists enclosed). Also, some
brands require you to press the
ENTER
key after you enter
a channel number. In some menu systems, you must press
the
ENTER
key to select a highlighted item.
GO BACK:
switches back to previous channel– operates the
same as
PREV CH
,
LAST CHANNEL
or
RECALL
keys found
on some brands of remote controls.
GUIDE:
brings up the on-screen TV program guide,
if your TV is equipped with that feature.
INFO:
shows program information, if your component
is equipped with this feature. Functions the same as a
DISPLAY
key.
INPUT:
selects the video inputs of your TV, if equipped
with this feature.
MENU•PROG:
accesses DVD disc menus when playing
a DVD disc. Accesses menu systems of some TVs, a few RCA
brand VCRs and satellite receivers. (For more information,
refer to the On-screen Menus section on page 12).
MUTE:
lowers the TV’s volume to its minimum level.
NAVIGATION KEYS
&
SELECT:
used to move through on-
screen menus and guides. Use the
NAVIGATION
keys to
move the highlighted choice up, down, left or right.
ON•OFF:
turns component on and off.
Note
: Some RCA, GE and PROSCAN models require that
you press the component
key to turn the component on and the
ON•OFF
key to turn the component off.
PIP:
(Picture-in-Picture) and
SWAP
operate your TV’s Picture-in-Picture, if your
TV is equipped with this feature.
RECORD:
use with VCR to record programming. You must press the
RECORD
key
twice to start recording.
SLEEP:
allows you to set a time to turn off your TV automatically.
VOL:
increases or decreases the TV or AUDIO system’s volume level.
Primary Key Descriptions For VIDEO Operations
RCU600BL_IB.qxd 10/17/03 8:09 Page 4
