RCA RCU600BL, User Manual

Program for VCR—Direct Entry Method

1. Manually turn on the VCR.

2. Locate the enclosed VCR Code List. Find your brand 

in the VCR Codes.

Note

: If your brand isn’t listed, use one of the Code Search

methods to program this remote control. (See section on 
Code Search on page 10).

3. Press and hold the 

CODE SEARCH

key until the indicator 

light illuminates. Then release the 

CODE SEARCH

key.

4. Press and release the 

VCR

key. The indicator light blinks 

and then remains lit.

5. Use the number keys on the remote to enter the first code

listed for your brand. After you enter a valid three-digit code,
the indicator light turns off.

Note

: If you enter an invalid code, the LED flashes rapidly 

for two seconds. Start over at step 3.

6. Aim the remote at your VCR. Press the 

ON•OFF

key. 

If your VCR turns off, you have found the correct code.

7. Enter the code in the box provided on this page for 

future reference.

8. If your VCR does not turn off, repeat steps 3-6 above,

entering the next code for your brand. 

If none of the codes work or your brand is not listed, use 
one of the Code Search methods to program this remote. 
(See Code Search section on page 10). 

In order for the six-component universal remote to control your VCR, you must program it with 
the code that matches your VCR. To program your remote to control your VCR, follow these steps:

(BLINK)

VCR CODE

(OFF)

1. Manually turn on the DVD/CD system.

2. Locate the enclosed DVD or CD Code List. 

Find your brand in the DVD or CD Codes.

Note

: If your brand isn’t listed, use one of the 

Code Search methods to program this remote control. 
(See section on Code Search on page 10).

3. Press and hold the 

CODE SEARCH

key until the indicator

light illuminates. Then release the 

CODE SEARCH

key.

4. Press and release the 

DVD

key. The indicator light blinks 

and then remains lit.

5. Use the number keys on the remote to enter the first code

listed for your brand. After you enter a valid three-digit 
code, the indicator light turns off.

Note

: If you enter an invalid code, the LED flashes rapidly 

for two seconds. Start over at step 3.

In order for the six-component universal remote to control your DVD or CD systems, you must program
it with the code that matches your component. To program your remote to control your DVD/CD system,
follow these steps:

(BLINK)

Program for DVD/CD Systems—Direct Entry Method

6

CODE

SEARCH

INDICATOR

LIGHT

CODE

SEARCH

INDICATOR

LIGHT

(OFF)

ON•OFF

VCR

DVD

RCU600BL_IB.qxd  10/17/03  8:09  Page 6