6. Aim the remote at the AUDIO component. Press the
ON•OFF
key. If your AUDIO component turns off, you have found the
correct code. If your AUDIO component does not turn off,
repeat steps 3-6 above, entering the next code for your brand.
7. With your AUDIO component on, press the
VOL+
(
VOLUME UP
) key. If the AUDIO component responds,
no further programming is required.
8. Enter the code in the box provided on this page for
future reference.
9. If none of the codes work or your brand is not listed,
use one of the Code Search methods to program this remote.
(See Code Search section on page 10).
The following is a list of instructions for operating Audio functions. Not all functions work for all
brands. Experiment with your AUDIO system to determine which functions work with your
components. See the enclosed AUDIO Code List to operate your brand of equipment.
TURNING ON THE RECEIVER
OR MINI-SYSTEM
Point the remote control at the receiver and press
the
AUDIO
key and then the
ON•OFF
key to turn
the system on.
SELECTING A COMPONENT INPUT
Component inputs such as a DVD player or VCR
may be selected depending on the features of your
receiver or mini-system. Input selection may be
made either by pressing the labeled number key
or pressing the
FUNCTION
key to toggle through
the inputs available on your system.
Note
: You may need to experiment with your
system since manufacturers’ products do not
all work in the same manner.
USING THE NUMBER KEYS TO
CHANGE AUDIO INPUTS
To select a component, press the number key
(1-6)
that corresponds with the component
you want to operate (
CD, TAPE, TUNER, TV,
VIDEO 1,
or
VIDEO 2
).
USING THE FUNCTION KEY TO
CHANGE AUDIO INPUTS
To select a component, press the
FUNCTION
key
until the input you want to operate appears on
your system.
OPERATING THE AM·FM TUNER
1. Press the
AUDIO
key and then the
ON•OFF
key to turn the system on.
2. Press the
TUNER
(3) key.
3. Press the
AM·FM
key to toggle between AM
and FM.
4. Use the Preset (
CH+/CH-
) keys to move up
and down channel presets.
OPERATING A HOME THEATER
SURROUND SOUND SYSTEM
1. Turn the TV on.
2. Press the
AUDIO
key and then the
ON•OFF
key to turn the system on.
3. Select the AUDIO input either by using the
labeled number keys or the
FUNCTION
key.
4. Press the
VOL+
or
VOL-
keys to control
volume.
Note
: The
VOLUME
keys may operate both
TV and receiver volume at the same time.
If this presents a problem, it may be resolved
by entering the TV menu and disabling the
TV speakers.
CONTROLLING THE
SURROUND SOUND FEATURE
Press the
DELAY+
or
DELAY-
key to achieve
the desired delay effect.
Press the
DSP ON•OFF
key to turn DSP
(Digital Signal Processing) on or off.
Press the
DSP MODE
key until the desired
effect is achieved.
Press the
TEST
key to listen to speaker levels.
Press
FRONT
,
CENTER
, or
REAR
keys to
select speakers.
Press the
LEVEL+
or
LEVEL-
keys to adjust
the speaker levels.
AUDIO SYSTEM CODE
9
ON•OFF
VOL+
Operating AUDIO System Functions
RCU600BL_IB.qxd 10/17/03 8:09 Page 9
