4
0-9
(Number Keys)
:
operate the same
as number keys on your original
remote and are used to enter
component codes when
programming the remote control
with Direct Entry method.
ANTENNA:
in TV Mode, switches
between the signal coming from a
satellite receiver or cable box and an
off-air antenna. In VCR Mode,
switches between the signal coming
from a VCR and a TV.
CH+
and
CH-
(
CHANNEL UP
and
CHANNEL DOWN
): goes to the next
highest or lowest channel number
in the component channel list,
respectively, except for DVDs. In
DVDs, the
CH+
and
CH-
keys refers
to the
NEXT/PREVIOUS
chapter.
CLEAR:
removes the on-screen
display to return to normal viewing.
CODE SEARCH:
use to program
the remote.
ENTER:
use with Manual or
Automatic Code Search method to
accept code (See Code Lists enclosed).
Also, some brands require you to
press the
ENTER
key after you enter
a channel number. In some menu
systems, you must press the
ENTER
key to select a highlighted item.
GO BACK:
switches back to previous
channel– operates the same as
PREV CH
,
LAST CHANNEL
or
RECALL
keys
found on some brands of remote controls.
GUIDE:
brings up the on-screen TV
program guide, if your TV is
equipped with that feature.
INFO:
shows program information,
if your component is equipped with
this feature. Functions the same as a
DISPLAY
key.
Primary Key Descriptions For VIDEO Operations
Other Keys (Listed Alphabetically)
Certain keys on the six-component universal remote have dual functions.
Primary functions are printed in black. Secondary key functions are printed
in blue on the remote and are used for AUDIO operations.
INPUT:
selects the video inputs of your TV, if equipped with this feature.
MENU•PROG:
accesses DVD disc menus when playing a DVD disc. Accesses
menu systems of some TVs, a few RCA brand VCRs and satellite receivers.
(For more information, refer to the On-screen Menus section on page 12).
MUTE:
lowers the TV’s volume to its minimum level.
NAVIGATION KEYS
&
SELECT:
used to move through on-screen menus and
guides. Use the
NAVIGATION
keys to move the highlighted choice up, down,
left or right.
ON•OFF:
turns component on and off.
Note
: Some RCA, GE and PROSCAN models require that you press the
component key to turn the component on and the
ON•OFF
key to turn the
component off.
PIP:
(Picture-in-Picture) and
SWAP
operate your TV’s Picture-in-Picture,
if your TV is equipped with this feature.
RECORD:
use with VCR to record programming. You must press the
RECORD
key twice to start recording.
SLEEP:
allows you to set a time to turn off your TV automatically.
VOL:
increases or decreases the TV or AUDIO system’s volume level.
RCU600M_IB_resized.qxd 3/24/04 4:10 AM Page 4
