RCA RCU600M - Universal Remote Control, User Manual

Program for VCR—Direct Entry Method

1. Manually turn on the VCR.

2. Locate the enclosed VCR Code List.

Find your brand in the VCR Codes.

Note

: If your brand isn’t listed, use one

of the Code Search methods to program
this remote control. (See section on 
Code Search on page 10).

3. Press and hold the 

CODE SEARCH

key

until the indicator light illuminates.
Then release the 

CODE SEARCH

key.

4. Press and release the 

VCR

key. The

indicator light blinks and then remains lit.

5. Use the number keys on the remote to

enter the first code listed for your brand.
After you enter a valid three-digit code,
the indicator light turns off.

Note

: If you enter an invalid code, the

LED flashes rapidly for two seconds.
Start over at step 3.

6. Aim the remote at your VCR. Press the

ON•OFF

key. If your VCR turns off, you

have found the correct code.

7. Enter the code in the box provided on

this page for future reference.

8. If your VCR does not turn off, repeat

steps 3-6 above, entering the next code
for your brand. 

If none of the codes work or your brand
is not listed, use one of the Code Search
methods to program this remote. 
(See Code Search section on page 10). 

In order for the six-component universal remote to control your VCR, you
must program it with the code that matches your VCR. To program your
remote to control your VCR, follow these steps:

(BLINK)

VCR CODE

(OFF)

1. Manually turn on the DVD/CD system.

2. Locate the enclosed DVD or CD Code

List. Find your brand in the DVD or
CD Codes.

Note

: If your brand isn’t listed, use one

of the Code Search methods to program
this remote control. (See section on
Code Search on page 10).

3. Press and hold the 

CODE SEARCH

key

until the indicator light illuminates.
Then release the 

CODE SEARCH

key.

4. Press and release the 

DVD

key. The

indicator light blinks and then remains lit.

5. Use the number keys on the remote to

enter the first code listed for your brand.
After you enter a valid three-digit code,
the indicator light turns off.

Note

: If you enter an invalid code, the

LED flashes rapidly for two seconds.
Start over at step 3.

In order for the six-component universal remote to control your DVD or CD
systems, you must program it with the code that matches your component.
To program your remote to control your DVD/CD system, follow these steps:

(BLINK)

Program for DVD/CD Systems—
Direct Entry Method

6

CODE

SEARCH

INDICATOR

LIGHT

CODE

SEARCH

INDICATOR

LIGHT

(OFF)

ON•OFF

VCR

DVD

RCU600M_IB_resized.qxd   3/24/04  4:10 AM  Page 6