RCA RCU900RF User Manual Download | Manualshive

Page: 23 / 36

background image

23

2. Release the

SETUP

key.

3. Press and hold the device key on the rubber keypad for

approximately 5 seconds (

TV

or

AUDIO/AUX

) for volume

control until the LED indicator light blinks and the Main
Setup Screen is shown.

4. The default volume control is now set for the mode you

have chosen.

VCR Punch-through

The RCU900RF punches through the six transport keys (

REVERSE

,

PLAY

,

FORWARD

,

RECORD

,

STOP

, and

PAUSE

) to VCR or

DVD Mode, whichever was used most recently. Punch-through
to VCR/DVD transport keys on the rubber keypad is only
allowed for TV, VCR, DVD, and Cable-coded Modes.
AUX, SAT and CD/Audio are dedicated to their
programmed modes.

In the VCR and AUDIO/CD Modes (including Punch-through),
the

RECORD

key on the rubber keypad must be pressed twice

before the command is sent. This is also true if a VCR device is
programmed under any other mode. The exceptions are for
DVD and SAT codes, where the

RECORD

key transmits the

command after only a single

RECORD

keypress.

Record Key

Keypress Beep Feature

Your RCU900RF beeps whenever a key is pressed to acknowledge
the keypress. You can turn this feature on or off. The default
setting is On.

To turn the Keypress Beep on or off, follow these steps:

1. Press and hold the

SETUP

key on the rubber keypad until

the LED indicator light remains on and the touchscreen
shows the Main Setup Screen. This process takes
approximately 2-3 seconds.

2. Release the

SETUP

key.

3. Press and hold the

MUTE

key on the rubber keypad for

approximately 5 seconds until the LED blinks and the Main
Setup Screen is displayed.

4. The Keypress Beep feature is now turned on or off,

depending on the previous state it was in.

LCD Touchscreen Display Time

You can choose the length of time the touchscreen remains on
after the last keypress. The power-on default is 30 seconds from
the last keypress. Setting the LCD Touchscreen Display Time also
changes the length of time the Backlight stays on, if activated.

To change the LCD Touchscreen Display Time, follow these steps:

1. Press and hold the

SETUP

key on the rubber keypad until

the LED indicator light remains on and the touchscreen
shows the Main Setup Screen. This process takes
approximately 2-3 seconds.

Additional Features

«
...
21
22
23
24
25
...
»

Summary of Contents for RCU900RF





































Reviews:

No comments

Related manuals for RCU900RF

The Remote Control

Brand: Polycom Pages: 13

RCR450 - Universal Remote Control

Brand: RCA Pages: 27

Brand: One for All Pages: 30

Brand: Magnavox Pages: 2

Brand: GE Pages: 9

Brand: Philips Pages: 106

SST-659 - Harmony Universal Remote Control

Brand: Logitech Pages: 20

Brand: Logitech Pages: 36

Brand: Chunghop Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands