Copyright © 2014 Discount Two-Way Radio Corporation - North American Distributor
RD3500
TM
Professional Two-Way Radio Instruction Manual
20
Main channel scan (manual): The radio scans all
channels in scan list/group. By programming,
the radio can scan the last activated channel
or start from 1st scan channel.
Auto scan: You can select one channel/group
which already programmed as auto scan, the
radio scans from this auto scan channel.
Nuisance Channel Delete
When scan remain one channel, press the
programmed nuisance channel key, the radio
will continue scan next channel, and will not
scan this channel afterward. But when the
scan function closed and then opens the
scan function, the radio will resume scan this
channel.
Start and Stop Scanning
1. Press programmed scan key or use the
channel knob to select one auto scan
channel.
2. When scan activated, LED indicator
flashing yellow, you can hear a confirm
tone. When scanning stop, LED indicator
Extinguish and a alarm tone heard.
Dual Priority Channel Scan
When set up one priority channel, activated
the priority scan function, such scan use Cyclic
scan mode, it always scans the priority channel
during each common scan.
In time of scan, response the transmission
scan. The radio remain in the activated
channel/group.
