Copyright © 2017 RCA Communications Systems
27
RDR2300
TM
Professional Digital Two-Way Radio Instruction Manual
6. If the target radio is active in the system, a
tone sounds and the display briefly shows
Target Radio Available.
OR - if the target
radio is not active in the system, a tone sounds
to indicate target radio not available.
7. Pressing the [
C
] button while the radio is
waiting for acknowledgement and the radio
terminates all retries and exits Radio Check.
Remote Monitor
(BR300D
TM
Only)
Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias or
IDs only). No audible or visual indication is given
to the target radio. You can use this feature
to monitor, remotely, any audible activity
surrounding the target radio.
Note:
Your radio must be programmed by your
RCA Communications Systems dealer to allow
you to use the Remote Monitor feature.
Initiating Remote Monitor
(BR300D
TM
Only)
Use the programmed Remote Monitor button.
1. Press [
O
] to access the main menu.
2. Press [
<
] or [
>
] to navigate to Contacts and
press [
O
] to select.
3. Press [
<
] or [
>
] button to get the required
subscriber alias or ID and press [
O
] button to
select. OR - press [
<
] or [
>
] button to Manual
Dial, then press [
O
]. Input subscriber alias or ID
and then press [
O
].
4. Press [
<
] or [
>
] to Remote Monitor and press
[
O
] button. Wait for acknowledgement.
5. The screen will display Remote Monitor:
<Subscriber alias or ID>, indicating that Remote
Monitor is in progress. The LED blinks red.
6. The display shows Remote Monitor Successful
OR - Shows Remote Monitor Failed.
7. If successful, the radio will start receiving audio
from the monitored radio for a programmed
duration. Once the timer expires, the radio
sounds an alert tone and the display shows
Remote Monitor Ended. OR - If unsuccessful,
the radio repeats the attempt until the
