4
The CD Player
Repeating
You can replay the entire CD or repeat
one track as many times as you wish or lis-
ten to the beginning of each track for 10
seconds.
Press
MODE
successively to
1. Replay the entire CD .
2. Replay the current track
3. Replay the beginning of each track for
10 seconds (The track number being
played will be displayed and
SCAN
will
appear.)
4. Press again to de-select the function
Program
This function lets you listen to the tracks
you selected in the order you want. The
CD player must be in Stop mode.
1. Press
PROG
.
P
will appear in the display.
2. Select the track to store by pressing
& press
PROG
again to
confirm.
3. Return step 2 to store other tracks.
4. Press play button to listen to your
programming.
Note : The unit switches off automatically
after 10s if no key has been activated. In
order to prevent excessive battery con-
sumption, the unit can switch off if you do
not press any key within 10s when pro-
gramming your unit. If the unit switches
off, the programme will be stored in
memory. Resume programming as normal
by turning the unit on again.
You can program up to 24 tracks.
To play your program again, press play.
To add/edit tracks to the program, go to
stop mode ; press and hold
PROG
button
again. Refer to step 2 of
Program
.
To check the program, press
PLAY
and
.
To cancel your program, press and hold
the
MODE
key when you are in the stop
mode.
ERASE
will appear in the display.
The program will be automaticallly can-
celed.
To exit program mode,
P
will disappear
from the display by pressing
STOP
then
PROG
.
or
EN
1
RP2360SC/BC/GC 8/23/00 11:01 AM Page 7
