Using the CD Player
EN
9
Using Auto Track Skip
(ATS)
ATS is the opposite of programmed play. Rather
than programming into memory the tracks that
you want to hear, with ATS you set the unit to
skip those tracks that you don’t like.
Creating an ATS Program
1. Press
ATS
to activate the feature. The VFD
display will be similar Fig. 3 with a flashing
disc number and “_ _”.
2. Press
DISC SKIP
to choose a disc.
3. Press
or
to choose the first
track to be skipped.
4. Press
PROGRAM
to add the seleced track to
the ATS program.
5. Repeat the preceding steps to add more
tracks to the ATS program.
6. Press
PLAY/PAUSE
to begin playing the ATS
program.
Recalling and Editing the ATS
Program
Editing the ATS program is a lot like editing a
regular program.
1. Press
ATS
to go to Auto Track Skip mode.
2. Press
PROGRAM
to move to the next
program number unitl you get to the
programmed track you want to change.
3. Press
DISC SKIP
to choose the disc, and then
press
or
to choose a replacement track.
4. Press
PROGRAM
to change the current
skipped track to the one you just selected.
1
2
3
4
5
6
7
8
9 10 11 12
13 14 15
ATS
ALL
DISCS
DISC
1
2
3
4
5
Fig. 3
Clearing the ATS Program
Clearing the ATS program is also a lot like
clearing a regular program.
1. Press
ATS
.
2. Press and hold
CLEAR
until
CLEAR
shows on
the display.
RP8070 IB rev3
8/14/01, 4:59 PM
10
