AV IN
HDMI 1
HDMI 2
DC IN
POWER
USB
VGA
IR
Refer to the following picture to connect a set top box, a BD/DVD player or a streaming
player to the HDMI input.
1. Turn the unit to standby mode before connect HDMI cable.
2. After connection, press the button to turn on unit and indicator will light GREEN.
3. Press the / SOURCE button, use the button to select HDMI and press button
to enter. The video from the connected device will be shown on projector screen.
4. Press the button to turn the unit to standby mode.
Connect HDMI Show The Image On Projector Screen
11
HDMI CABLE
CABLE NOT INCLUDED
Video Player
OK
Follow below picture to connect AV cable and device.
1. Turn the unit to standby mode before connect AV cable.
2. After connect, press the button to turn on unit and power indicator will light GREEN
3. Press the /
SOURCE
button, use the button to select AV and press button
to enter. The video of AV device will show on projector screen
4. Press the button to turn the unit to standby mode.
Connect AV Show The Image On Projector Screen
OK
Important Note:
If there is no sound from the internal speakers when
playing media contents from a set top box, BD/DVD or
streaming players connecting to the HDMI input, please
check the set top box or the player's digital audio
settings and make sure it is set to "PCM Stereo" mode.
VIDEO CABLE
Cable is not included
LEFT CHANNEL
RIGHT CHANNEL
AV IN
HDMI 1
HDMI 2
DC IN
POWER
USB
VGA
IR
