RCA RPJM030, Instruction Manual

Technical Data

：

Suitable for different kinds of projector

VESA standard: Unlimited

The  tle angle can be freely adjusted
The complete set of installa on
screws are included
Maximum loading: 18KGS
Material: SPCC
Color: Black.  
Product Height: 135mm

* Note: the projector you are installing may differ in appearance from the sample illustrated below.

   Place projector upside down. Locate Product Assembly (A) with Universal Plate facing forward as

   close to projector center of gravity as possible without covering any moun ng holes Loosen 

   Extension Bracket, and if there are only three moun ng holes remove fourth Extension Bracket.

   Using one Extension Bracket for each moun ng hole posi on Extension Bracket,bo om washer

   (D) and washers (E, G) over moun ng holes as shown in fig 1 

   Important: if projector dose not have at least three moun ng holes, do not use this adapter plate

*Note: Some projectors have feet, which can be removed, and the corresponding threaded insert 

   can be used for a moun ng hole.

*Note: Once Extension Bracket are in posi on re ghten fasteners.

*A ach Product Assembly (A) to projector using one screw (B,C) for each channel as shown in fig2.

   Tighten all screws, while keeping the center of gravity. Be sure that Prodect Assembly (A) is

   straight. Tighten all screws with Phillips screwdriver, while keeping the center of gravity.

*Note: Projectors will require different size screws for moun ng. Use a suitable screws (B,C) and 

   Washers (E, F, G) that will result in Extension Bracket of Product Assembly (AA) fi ng  ghtly

   against projector. Important : In order to properly engage the threads in the moun ng holes,

   the screw must be turned at least 3full turns. Cau on: it is the responsibility of the installer to

   ensure that the projector is properly ver lated.

Item

Description

Qty.

Parts List

A

B

C

D

E

F

G

H

I

J

K

Product Assembly

Truss Head Screw M4

x

25

Button Head Cap Screw

Truss Head Screw M

6

x

25

Bottom washer

1mm washer

2mm washer

3mm washer

Square Nut

Tighten tool

Tighten tool

Extens on Bracket 1 

Extens on Bracket 2

1

4

4

3

4

4

4

4

1

1

2

Fig 1

Fig 2

Installation tools (not included)

Electric drill

8mm-dril 

Hammer

Screwdriver

-20

°

/

+20

°

60

°

MODEL

NO

. 

RPJM030

UNIVERSAL PROJECTOR CEILING AND TABLE MOUNT

INSTRUTION MANUAL

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

This product is manufactured and sold by Curtis International Ltd.
RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered
trademarks or trademarks of RCA TrademarkManagement and are used
under license by Curtis International Ltd. Any other product, service,
company, trade or product name and logo referenced herein are neither
endorsed nor sponsored by RCA Trademark Management or its affiliates.

For service assistance and product information, please call: 

1-800-968-9853

.

Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15,
MISSISSAUGA, ON, L5S 2A3 www.curtisint.com

A1

4

1

L

L

2

I

J

B

A