Copyright © 2015 RCA Communications Systems
RPX6500 P25 MOBILE RADIO - USER MANUAL
22
With the
Mute Adjust
menu option displayed, press the
OK
key to access the
Mute Adjust
screen.
A numeric value of the present mute level will be displayed.
Use the / keys to adjust the mute threshold as required. Press the
OK
key to confirm the
selected mute setting and return to the default channel screen.
The mute adjustment will be applied to all the radio’s analog channels.
It is recommended that the default mute setting of 4 be used. The RPX6500 radio has a carrier
noise mute, which means the mute will open at the point where an analog signal is sufficiently
noise free to be intelligible with a setting of 4.
Where the default mute setting is not acceptable, it may be adjusted for analog channels so
that:
0 corresponds to “no muting”
4 will hear all intelligible signals
8 will hear slightly noisy signals
15 will only hear signals with no background noise
Direct access to the
Mute Adjust
screen from other screens can also be programmed to one of
the function keys with the PS.
5.5. PHONEBOOK MENU
From the main channel screen, press the Menu key to enter Menu Mode. Use the / keys to
scroll through menu options. With the
PhoneBook
menu option displayed, press the
OK
key to
access the
PhoneBook
screen.
From the PhoneBook screen, it is possible to view all of the phone entries in the phonebook.
These entries may be Individual Addresses, Telephone numbers or Talk Groups.
When the PhoneBook screen is displayed, it will show the currently selected phonebook entry.
The second line shows the name of the selected entry.
The third line shows the unit identifier of the selected entry. This is the P25 ID that the radio will
call.
The fourth line shows the IP address associated with the phonebook entry. IP addresses are used
for data calls and text messages.
Use the / keys to scroll through and select the relevant phonebook entry. To return to the
Menu screen, press either the
Back
or
Menu
keys.
A function key (when configured for Reset, or any other key configured for Reset) will exit back
to the default channel screen.
