EN
Unpacking Your System
You should have:
• One main unit (with 2 speakers);
• One remote control;
• One user’s guide;
• Safety Leaflet
•Owner Registration Card
Installation
To ensure sufficient ventilation, keep the spacing
shown as below:
Front View
Side View
Getting Started
1
4 inches
2 inches
Using the Antenna
Before you use your audio system, you’ll want to
make sure the FM antenna is positioned properly.
The FM antenna is the coiled wire connected to
the back of the unit. Uncoil it, making sure it is
fully extended (you may even want to tape it to
the wall behind the unit, if possible. The higher,
the better.)
For better AM reception, move or rotate the unit.
Connecting the Speakers
When connecting the speakers, match the red
wires to the red jacks and the black wires to the
black jacks. Each speaker has a black and a red
jack, one for positive and one for negative. The
top two jacks are for the left speaker, while the
bottom two jacks are for the right speaker.
Release tab to lock wire in
the terminal.
NOTE:
Make sure the insulation is completely removed from the
ends of the speaker wires at all connection points.
Speaker Wire Connection
Push Speaker terminal tab
down to insert wire.
DIGITAL LOGIC DECK
POWER/
STAND-BY
DIGITAL PLL SYNTHESIZED TUNER
MULTI FUNCTION LCD DISPLAY
TUNING
CLOCK/
TIMER
BAND•APP
ST•MONO
REC•
II
IR SENSOR
PROG/
SET/CLEAR
EQ
X-BASS
PRESET
V O
L U ME
C O
N T R OL
TUNER
T APE
CD
TIMER
PLAYBACK/ RECORD
OPEN/
CLOSE
R
L
FM ANT
4 inches
4 inches
4 inches
RS2001 EN
7/23/02, 3:48 PM
6
