14
1
1
Press the [SETUP] button and select
“CHANNEL SET”. Select “Add/Remove
Channels”.
2
2
Select the channel to delete.
Use the [NUMBER] buttons on the remote control to enter
the channel to delete.
Press the [
3
] button to select “ADDED” or press the [
2
] button to select
“REMOVED”
under the channel number.
3
3
To make sure the selected channel has been deleted, press [CH up or down] on the
remote control.
Channel 02
is now ADDED.
To Delete Channels Manually
Memorizing TV Channels
Selecting cable or antenna viewing
To Set Output Channel
ADD/REMOVE CHANNELS
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
Channel Change:
CH3
■
Follow the procedures below to delete stored channels.
■
You can set the viewing mode on your VCR, choose either CABLE (cable system connection) or ANTENNA
(antenna connection).
Press the [SETUP] button and select
“CHANNEL SET”. Select “Channel Change”.
Press [ENTER] to set the exclusive video channel (CH3 or
CH4).
To set the viewing mode:
From the CHANNEL SET menu, press [
∞
∞
] to move the
cursor down to SIGNAL TYPE. Press [ENTER] to toggle
between CABLE and ANTENNA.
When the desired viewing mode is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
Channel Change:
CH3
RTD300 EN 7/25/03 2:36 PM Page 18
