17
EN
Searching a cassette tape for programs (indexing)
Press the [SETUP] button to display the
SETUP menu.
Select “FUNCTIONS” from the SETUP menu and
press [ENTER] to display the “FUNCTIONS”
menu.
Select “Index Search” from the
“FUNCTIONS” menu and press
[ENTER] to show the INDEX SEARCH
menu.
To search through a certain number of index
marks, enter the number of marks you want to
search with the number buttons (the entry
must be a two digit number).
Press [CLEAR] on the remote control to correct
an entry.
or
Press REW to search backward or FF to search
forward. The VCR will locate your index mark
and begin playback. If you did not enter a
specific index number, the VCR will locate the
next index mark and begin playback. Press
STOP to stop index searching.
Using advanced features
1
1
2
2
FUNCTIONS
Auto Play:
ON
Auto TV/VCR:
ON
Index Search
Go-To Search
INDEX SEARCH
Press REW or FF
to begin searching
or
Enter a specific
index number
- -
End: SETUP
■
When you record a programs, the VCR places an index mark at the start of each recording. To search for an
index mark:
• If two
recordings
overlap, the index
mark for the
second program
will be erased.
Therefore, when
you use the index
feature to find the
second program,
the VCR will skip
over it.
• If you record
multiple programs
in one recording
session, the VCR
will only find the
index mark that
was placed on the
video cassette tape
when the recording
session began.
RTD300 EN 7/25/03 2:36 PM Page 21
