Chapter 1
5
Chapter 1: Connections and Setup
Back of the Home Theater Music Jukebox
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc. A description of each jack
follows.
Description of Jacks
1.
ETHERNET
— Connects to your home network or router using an Ethernet cable.
2.
MODEM
— Connects to your home telephone wiring for dial-up Internet access.
3.
Component Video Out jacks
— If your TV has component video input jacks, connect to your TV for optimum quality.*
4.
S-VIDEO OUT jacks
— If your TV has an S-Video input jack, connect to your TV for better picture quality than using the VIDEO jack.
5.
S-VIDEO IN jacks
— If your video source component (e.g. cable box or satellite receiver) has an S-Video output jack, connect it to this S-Video
input for better quality than composite video.
6.
VIDEO IN and OUT jacks
— Allows you to connect a VCR and send the signal to your TV.
7.
Audio Input jacks (VCR, SAT, TV, AUX)
— Connects to your audio input sources.
8.
DIGITAL AUDIO IN/OUT jacks
— Connects to your digital audio input sources and connects your jukebox to a receiver or decoder with Dolby
Digital capability using a digital connection.
9.
ANTENNA jacks
— Allow you to connect AM/FM antennas for better radio reception (see page xx for installation instructions).
10.
Speaker jacks
* Note: The Component Video Out jacks can’t convert composite video or S-video to component video.
MONITOR OUT
VIDEO
AUDIO
OUT
OUT
AUX
MAIN
1
2
3 4 5 6
7
8 9
10