EN
2
Connections and Setup
Things to consider before you
connect
s%NSURE THAT THE MAINS SUPPLY IN YOUR
house complies with that indicated on the
identification sticker located on the back of
your unit.
s)NSTALL YOUR UNIT HORIZONTALLY AWAY FROM
any source of heat (fireplace) or appliances
creating strong magnetic or electric fields. The
components of this unit are sensitive to heat.
4HE MAXIMUM AMBIENT TEMPERATURE SHOULD
NOTEXCEED # &
s,EAVEENOUGHSPACEAROUNDTHEUNITTOALLOW
adequate ventilation: 10 cm/4 inches on either
side and above the top, and 5 cm/2 inches at
the rear.
s4HEHUMIDITYOFTHEROOMSHOULDNOTEXCEED
75%. If you have to use the unit outdoors,
DO NOT EXPOSE IT TO RAIN OR SPLASHING WATER
4HE APPARATUS SHOULD NOT BE EXPOSED TO
dripping or splashing and no objects filled
with liquids, such as vases, should be placed
on the apparatus.
s-OVING THE UNIT FROM A COLD PLACE TO A
warm one can cause condensation on
some components inside the unit. Let the
condensation disappear on its own before
turning the unit on again.
s"EFORE MOVING THE UNIT MAKE SURE THE DISC
tray is empty.
s7HERETHEMAINSPLUGORANAPPLIANCECOUPLER
is used as a disconnect device, the disconnect
device shall remain readily operable.
s/THERIMPORTANTUSEANDCLEANINGINFORMATION
at the end of the booklet.
Remote control and
X!!!BATTERIES
Composite
Video Cable
FM Pig-Tail
antenna wire
%XTERNAL!-
loop antenna
Subwoofer
Accessories provided
Subwoofer
speaker wire
Wall Mounting Hardware
Wall-mounting must be carried out by professional
home theater installers. Additional or alternative
parts may be needed for certain type of wall
constructions.
RCA RTS202 ib.indd 2
6/6/2008 11:07:31 AM
