10
TROUBLESHOOTING
This product has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If
your cassette deck is not operating as it should, take it to your local RadioShack store or call 1-800-THE-SHACK for assistance.
Problem
Probable Cause
Suggestion
No sound while the tape is
operating.
Volume of stereo receiver/amplifier is set to
0.
Adjust the volume.
Input function switch of amplifier is not set to
TAPE
.
Set the input function switch to
TAPE
.
Strange tone quality or ragged
sound.
Noise reduction switch is not in the correct
position.
Set the noise reduction switch to match
the appropriate kind of recorded tape
you are using.
RECORD
cannot be operated.
Erase-protection tabs are removed.
Cover the erase-protection tab slots with
adhesive tape.
Low volume or weak sound with
mute intervals.
Tape heads are dirty.
Clean the tape heads.
