CLOCK DOES NOT SHOW CORRECT TIME:
• There was a power outage. Set the clock again as described in "Setting the Clock".
CLEANING THE UNIT
• Do not use volatile chemicals on this unit. Clean by lightly wiping with a dry soft cloth.
• Keep the CD Drawer closed to keep dust out of the unit.
CLEANING THE CD
• If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc from the center outwards with a
clean cloth. After playing, store the disc in its case.
HANDLING THE CD
• Only touch the CD on the edge to avoid finger prints on the underside of the CD.
• Do not stick paper or tape on the underside of the CD, and do not write anything on the underside of the disc.
CD LENS CARE
• When your CD lens gets dirty it can cause the unit to output poor sound quality. To clean the lens you will need to purchase a
CD lens cleaner. For instructions on cleaning the CD lens, refer to the instructions accompanying the CD lens cleaner.
Troubleshooting, Care & Maintenance
1. Press the
TIMER
button. The “TIMER” indicator blinks.
2. Press the
/ TUNE +
or
/ - TUNE
buttons to select
your desired time from 1-99 minutes.
• TIP: Press the TIMER button repeatedly to select following
preset times: 10, 15, 30, 45, 60, 75, 90 minutes. You can
then "fine-tune" your time by using the
/ TUNE +
or
/ - TUNE
buttons.
• TIP: Press and hold the
/ TUNE +
or
/ - TUNE
buttons to fast forward/reverse to desired time.
3. When the preset time elapses, the ALARM will sound.
4. To turn Off the ALARM, press the
TIMER
button once.
Otherwise, the ALARM will automatically turn off after 60
minutes if no button is pressed.
Note: Do not press any buttons within 5 seconds after setting
the cooking time, otherwise, the cooking timer will be cancelled.
CANCELLING THE COOKING TIMER
• Press the
TIMER
button until the time of the cooking timer
shows "00". The “TIMER” indicator will disappear within 5
seconds.
TIMER
Setting the Cooking Timer
CD Playback
CD PLAYBACK
1. Press the button on the front panel to turn on the unit.
2. Press the
CD·RADIO
button to change CD mode.
3. Press the button to open the CD drawer. Place a CD
onto the CD tray with the label side up and then press the
button to close it. The CD will be scanned by the unit and
the total number of tracks will be displayed.
4. Press the
button to start playing the CD. The current
track appears on the display.
Note:
During playback, the track number will disappear and the
time will be displayed if no button is pressed within 5 seconds.
• Adjust volume by pressing the /- buttons.
To Pause Playback
• Press the
button. The current track
number blinks.
• To resume playback, press the
button again.
To Stop Playback
• Press the
button.
To SKIP to a Different Track
• To SKIP to the beginning of the
CURRENT track, or any
earlier track, press the
/ - TUNE
button.
• To SKIP to the beginning of the NEXT track, or any later
track, press the
/ TUNE +
button.
To FAST FORWARD or FAST REVERSE to a Particular
Point
• To scan forward at high speed, press and hold the
/
TUNE +
button and release it at the desired point.
• To scan backward at high speed, press and hold the
/ -
TUNE
button and release it at the desired point.
• Fast forward or Fast reverse will continue searching the CD
until it reaches the end.
CD REPEAT PLAYBACK
Repeating the Current Track
• Press the
/ PRESET
button until “REPEAT” blinks, the
current track will be played repeatedly.
• Select a desired different track to be repeated by pressing
the
/ TUNE +
or
/ - TUNE
buttons.
4. To add additional tracks, repeat steps 2 - 3 (up to 20 tracks).
5. To start playback, press the button.
To check the program:
• After setting, press the
button to start playing, then press
the
/ TUNE +
or
/ - TUNE
buttons to check the
programmed tracks.
To add additional tracks during program playback:
• Press the
button, then press the
/ MEM
button
repeatedly until the number of the last programmed track
appears and repeat steps 2 - 4 above.
To change the programmed tracks during program
playback:
• Press the
button, and press the
/ MEM
button
repeatedly to select the number of the program, then press
the
/ TUNE +
or
/ - TUNE
buttons to alter the track.
Press the
/ MEM
button to register the newly programmed
track into memory.
To erase the whole program, do one of the following:
• Press the
button twice.
• Press the CD
·
RADIO button to change to radio mode.
• Open the CD drawer by pressing the
button.
Note: You can use the REPEAT function during program play.
CD
CD
CD
CD
REPEAT
CD
MEMORY
CD
MEMORY
LIMITED WARRANTY
AVC MULTIMEDIA ("AVC")
makes the following limited
warranties. These limited warranties extend to the original
consumer purchaser and is limited to non-commercial user of the
product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to
be free from defects in materials or workmanship for a period of
one year from the date of their original retail purchase. If the unit
fails to conform to this warranty, we will service the product using
new or refurbished parts and products, at
AVC
's sole discretion.
During a period of one year from the effective warranty date,
AVC
will provide, when needed, service labor to repair a
manufacturing defect at its designated Service Center. To obtain
warranty service in the United States, you must first call our
Customer Support Center at 1- 877- 252 - 6873, during the
hours listed in the box below.
The deternination of service will
be made by AVC customer support.
PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT
PRIOR AUTHORIZATION
. New or remanufactured replacements
for defective parts or products will be used for repairs by
AVC
at its designated Service Center for one year from the defective
warranty date. Such replacement parts or products are warranted
for an additional one year from the date of repair or replacement.
The Customer will be required to ship the unit to the Service
Center indicated at the time Customer Support is contacted to
make the necessary repairs. The customer is responsible for all
transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must
use the original carton box and packing material or an equivalent
as designated by
AVC
.
In the event your product requires repair after the limited
warranty period has expired, please contact our Customer
Support Center at
1-877-252-6873
or
www.RCAav.com
Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm,
Saturday: 9am-NOON Eastern time.
Important:
You are responsible for any transportation, shipping or
insurance relative to the return of the product to our Product
Returns Center.
Important:
Also keep your “Bill of Sale” as proof of purchase.
Model no. ................................ Product name .........................
Type of set .............................. Serial no. ................................
Invoice no. .............................. Date purchased ......................
Dealer name ...........................
FOR SERVICE AND REPAIR, PLEASE VISIT
www.RCAav.com.
Specifications and external appearance are subject to change
without notice.
Your Responsibility
(1) You must retain your bill of sale to provide proof of purchase.
(2) These warranties are effective only if the product is
purchased and operated in the U.S.A. or Canada.
(3) Warranties extend only to defects in material or
workmanship, and do not extend to any product or parts
which have been lost or discarded, or damage to product
or parts caused by misuse, accident, improper operation
or maintenance, or use in violation of instructions provided
with the product, or to product which has been altered or
modified without authorization of
AVC
, or to products or
parts thereof which have had the serial number removed or
changed.
Out of Warranty
Limited Warranty
All warranties implied by state law, including the implied
warranties of merchantability and fitness for a particular purpose,
are expressly limited to the duration of the limited warranties set
forth above. With the exception of any warranties implied by state
law as hereby limited, the foregoing warranty is exclusive and in
lieu of all other warranties, guarantees, agreements and similar
obligations of manufacturer or seller with respect to the repair
or replacement of any parts. In no event shall
AVC
be liable for
consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized
to change, modify or extend the terms of these warranties in any
manner whatsoever. The time within action must be commenced
to enforce any obligation of
AVC
arising under the warranty
or under any statute, or law of the United States or any state
thereof, is hereby limited to one year from the date of purchase.
This limitation does not apply to implied warranties arising under
state law.
This warranty gives you specific legal rights and you may also
have other rights, which may vary from state to state. Some
states do not allow limitation on how long an implied warranty
lasts, when an action may be brought, or the exclusion or
limitation of incidental or consequential damages, so the above
provisions may not apply to you.
For more information on other products and services, please
contact our web site at
www.RCAav.com
.
Printed in China
811-329991W010
The unit must be in standby mode. To enter standby mode,
make sure that the unit is plugged in, but not turned on.
1. Press and hold the
/ MEM
button until the HOUR digit
blinks.
2. Press the
/ - TUNE
or
/ TUNE +
button to set the
current hour, then press the
/ MEM
button to confirm.
3. Press the
/ - TUNE
or
/ TUNE +
button to set the
current minutes.
4. Press the
/ MEM
button to start the clock. The clock will
automatically start if no button is pressed within 5 seconds.
Note:12-hour system "12:00 PM" = NOON.
Setting the Clock
TUNING IN TO A STATION MANUALLY
1. Press the button on the front panel to turn on the unit.
2. Press the
CD·RADIO
button on the unit until TUNER is
displayed.
3. Press the
AM /FM
button on the unit to select AM or FM.
4. Press the
/
TUNE +
or
/ - TUNE
button to tune in to
a desired station.
Note:
When using the radio, the station will disappear and the
time will be displayed if no button is pressed within 5 seconds.
To Quickly Search for a Station
Press and hold the
/ TUNE +
or
/ - TUNE
button until
the tuner starts searching for a station, then release.
The tuner will stop on the next station.
To Turn Off the Radio
Press the button on the unit to turn the unit off.
SETTING A RADIO STATION PRESET
The unit can store a total of 20 stations in memory (10 FM, 10
AM). Presetting allows you to tune in to a station directly.
1. Press the
CD·RADIO
button on the unit to select TUNER.
2. Press the
AM /FM
button on the unit to select AM or FM.
3. Press the
/ TUNE +
or
/ - TUNE
buttons to tune in to
a desired station.
4. Press the
/ MEM
button until the “MEMORY” indicator
blinks and the two digits (e.g. "01") blink on the display. The
digits (e.g. "01") indicate the preset station number that will
be used to store your station.
5. If you want to store to a different preset number, simply
press the
/ PRESET
button to repeatedly until the
desired preset station number is displayed.
6. Press the
/ MEM
button to store the station.
7. Repeat steps 3 to 6 for the next preset.
TUNING IN TO A PRESET RADIO STATION
1. Press the
CD·RADIO
button on the unit until TUNER is
displayed.
2. Press the
AM /FM
button on the unit to select AM or FM.
3. Press the
/ PRESET
button to select a preset station.
Radio
CD Mode
1. During playback, press the
DISPLAY
button repeatedly to
shuffle between the CD playback mode and the current time.
2. When stopped, press the
DISPLAY
button to shuffle
between the total number of CD tracks and the current time.
RADIO Mode
• Press the
DISPLAY
button to shuffle between the current
radio station and the current time.
Display Function
Repeat the Entire CD
• Press the
/PRESET
button until
“REPEAT” stops blinking and remains
on.
All tracks will be played repeatedly.
Cancel Repeat Play
• Press the
/PRESET
button until “REPEAT” disappears.
CD PROGRAMMABLE PLAYBACK
20 tracks can be programmed to play in a preset order.
1. When the unit is ON and in CD MODE,
make sure the CD is STOPPED. Press
the
/ MEM
button. “MEMORY” and “1
” will blink on the display.
2. Press the
/ TUNE +
or
/ - TUNE
buttons to select the desired track. For
example, to play track 2 first, the display
would look like this:
3. Press the
/ MEM
button to store the track in memory.
CD
REPEAT
Need more help?
Please visit online help at
http://www.RCAav.com
