3
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your product, safety is
a major factor in the design of every product. However, safety is your responsibility too.
This sheet lists important information that will help to assure your enjoyment and proper use of the product
and accessory equipment. Please read them carefully before operating and using your product.
Installation
1
Read and Follow Instructions—
All the safety and
operating instructions should be read
before the product is operated. Follow all operating
instructions.
2
Retain Instructions—
The safety and operating instructions
should be retained for future
reference.
3
Heed Warnings—
Comply with all warnings on the product and in the operating instructions.
4
Polarization/Grounding—
This product is equipped with either a polarized, non-polarized, or a
grounding type power cord plug. If equipped with the non-polariz-ed type (two blades of identical size),
the following does not apply.
•
A polarized power plug (two blades, one wider than the other) will fit into a power receptacle only
one way. This is a safety feature. Do not defeat it. If you are unable to insert the plug fully, try
reversing it, or have an electrician change the receptacle. If you need an extension cord, use only a
polarized extension cord.
•
A grounding type power plug (two blades and a round pin) will fit only into a grounding type
receptacle with matching openings. This is a safety feature. Do not defeat it. You may need an
electrician to install a grounding type receptacle. If you need an extension cord, use only a
grounding type extension cord.
5
Power Sources—
This product should be operated only from the type of power source indicated on the
product's marking label. If you are not sure of the type of power supply to your home, consult your dealer
or local power company. For products intended to operate from battery power, or other sources, refer to
the operating instructions.
6
Overloading—
Do not overload wall outlets or extension cords as this can result in a risk of
fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged
or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or
fire hazard. Periodically examine the cord, and if its appearance indicates damage or
deteriorated insulation, have it replaced by your service technician.
7
Power-Cord Protection—
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. Pay particular attention to cords where they are
attached to plugs, convenience receptacles and at the point where they exit from the product.
8
Ventilation—
Slots and openings in the enclosure are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These openings must not be blocked or
covered. These openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or heat register, or another
heat source (including amplifiers). This product should not be placed in a built-in instal-lation such as a
bookcase or equipment rack unless proper ventilation is provided or the product manufacturer’s
instructions have been followed.
9
Attachments—
Do not use attachments unless recommended by the product manufacturer as they may
cause hazards.
10 Water and Moisture—
Do not use this product near water—for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like.
11 Accessories—
Do not place this product on an unstable surface or support. The product may fall, causing
serious injury to a child or adult as well as serious damage to the product. Any mounting of the product
should follow the manufacturer’s in-structions and use only a mounting accessory recommended by the
manufacturer.
