Connections & Setup
Chapter 1
13
On Always
The TV is always on and cannot be turned off; the Sleep Timer, Schedule and Energy Saver settings are
disabled.
Notes: When On Always is being used, KidPass is unavailable.
When the DSCI (Digital Serial Communications Interface) port is used to turn the TV on and off, the On Always setting is
overridden.
Switched
The TV can be turned on or off; Sleep Timer, Schedule and Energy Saver can be enabled. This is the default
setting.
Energy Saver
When enabled, this feature turns the TV off after a specified period of inactivity (no remote or front panel
button presses). You can toggle between Disabled, 2-hour, 1-hour, and 30-minute settings. Disabled is the default setting.
If
TV Power
is set to
On Always
,
Energy Saver
settings are ignored. A warning message will be displayed prior to the TV
shutting off.
Front Panel
This setting determines whether the front panel buttons are active (able to be used to control the TV) or not.
Parental Controls
This feature determines the amount of access basic users have to Parental Controls. Blocking age-
based rating and content themes is described in Chapter 3. Choose between:
Basic&Pwd (Password)
Basic users are able to enter the Parental Control menu and change the password. Basic
users can watch blocked programming by entering the system password. This is the default setting.
Basic
Basic users are able to enter the Parental Control menu but cannot change the password. Basic users can watch
blocked programming by entering the system password.
NoBasic
Parental Control does not appear on the basic Main menu. Basic users can watch blocked programming by
entering the system password.
If Parental Controls is set to
NoBasic,
Movie Rating Access, TV Rating Access, Unrated Program Block, and Channel Block
will not be available to basic users, regardless of what those items have been set to individually in the Parental Controls
menu.
Min Stdby Power
When enabled, keeps power consumption levels compliant with ENERGY STAR
®
guidelines. The TV is
shipped with this enabled.
Legacy Mode
When turned On, allows the TV to work with earlier DSCI versions. Thus making the set usable with older
systems. Off is the default setting.
Note: When Remote Config. and Front Panel are set to Disabled, the MENU button on the master remote turns on the
TV.
1644105Ae.indb 13
7/18/05 2:27:26 PM
