55
Reference
•
A minus (–) will appear in front of the time if you rewind the tape
farther back than a counter reading of 0:00:00.
•
The time counter disappears during search; this is normal.
Will not record or play
•
Check to make sure there is a tape in the VCR.
•
Try ejecting and reinserting the cassette.
•
Check to make sure the tape is not broken.
•
Check to make sure the VCR is not in pause mode. Press PAUSE or
PLAY to return to normal playback.
•
Check the ProTect Plus™ feature.
Rewind does not operate
•
Check to make sure the tape is not already rewound.
VCR Plus+ or timer recording not made or wrong program
recorded
•
Check to make sure the correct VCR Plus+ code is entered.
•
Check to make sure the cable box or satellite receiver was turned on
when recording was to begin.
•
Check to make sure the program was entered correctly (wrong
channel or times).
•
Power interruption. Reset the clock.
•
Check to see if time and date are correct – including AM/PM.
•
Check to make sure the program did not exceed the tape’s length or
the tape was not rewound beforehand.
•
Check to make sure the VCR was turned off at the time recording
was to start.
•
Check to make sure there was a tape in the VCR and the cassette’s
safety tab was intact.
•
VCR ejects cassette when the end of the tape is reached during a
timer recording.
•
Check to make sure VCR Plus+ setup was completed correctly.
Will not record
•
Check to make sure the safety tab is intact.
•
Check to make sure the VCR is not in the line mode. Press INPUT on
the remote.
Internal clock shows incorrect time or date
•
Power interruption.
•
Check to make sure the clock is set accurately (check AM/PM and
date).
•
Check Daylight-Saving setting. The clock may have adjusted for
daylight-saving time.
