8
5. Place channels in the VCR’s memory.
The first time you turn on the VCR or after a power
interruption, the VCR displays a message on the TV screen
prompting you to perform
AUTO-SEARCH CHANNELS
. If
the message does not appear, go to step
A
below.
If the message appears, follow the directions on the screen.
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest
channel found. Then, pressing
CHAN
up or down selects only
the active channels.
If you ever need to manually
SETUP CHANNELS
on the
VCR because you change cable or antenna signals:
A
. Press
MENU
to display the
VCR MAIN MENU
on the TV
screen. If this menu does not appear:
• Make sure TV is tuned to same channel as the
3CH.4
switch on the VCR or the TV’s video input (refer to
TV’s manual).
• If you use a basic hookup, check the
VCR
indicator in
display panel — it should be on. Press
TV•VCR
to
turn it on.
• Check the connections.
B
. Press
3
to display the
CHANNEL SETUP
menu.
C
. Press
1
to begin
AUTO-SEARCH CHANNELS
.
The VCR automatically selects
CABLE
(cable TV) or
ANTENNA
. If you need to change the setting manually,
press
3
.
6. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do not
want to watch them.
You must place channels in memory using the
AUTO-
SEARCH CHANNELS
feature described above before you can
add or remove channels.
A
. Press
MENU
on the remote to display the
VCR MAIN
MENU
on the TV screen.
B
. Press
3
to display the
CHANNEL SETUP
menu.
C
. Press
2
to display the
ADD/REMOVE CHANNEL
menu.
D
. Follow the directions on the screen.
E.
Add or remove more channels using the
CHAN
up and
down buttons.
Setting Up the VCR
Startup
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
AUTO-SEARCH CHANNELS
CONNECT ANTENNA CABLE...
THEN PRESS CH UP
CHANNEL SETUP
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
3 TUNING MODE: CABLE
4 CABLE BOX SETUP
0 EXIT TO MAIN MENU
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
CHANNEL SETUP
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
ADD/REMOVE CHANNEL
CH 03
IS PRESENTLY ADDED
PRESS CLEAR TO REMOVE
PRESS MENU TO EXIT
