15
Setting Up the VCR
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
4.
Enter the data using the number buttons. Press 0 before
single-digit numbers and follow the on-screen directions.
SET TIME AND DATE
Time 12:34 PM
Date 11/18/99 Thursday
Press CLEAR to correct
Press MENU to set
VCR Plus
+
®
Silver Programming System
The VCR Plus+ SILVER programming system makes VCR set up
automatic by setting and updating the clock and channel list for
you. During the one-time initial set up, the VCR prompts you to
enter your zip code. Soon after, the VCR clock will set itself and,
overnight, the VCR Plus+ SILVER system will input a channel list
for you.
Time, date, and VCR Plus+ system information are downloaded
from participating TV stations over your antenna or cable system.
Time and date are updated each time the VCR is turned off (and
after every power interruption). So, when your TV stations or
cable company update their programming lineups, your VCR will
get the most current channel list automatically. This frees you
from having to manually change the channel list whenever
channels are reorganized.
If your VCR Plus+ SILVER system fails to download the proper
information for any reason, channels can be manually mapped in
the VCR. AUTO VCR Plus+ can also be turned off if prompts
about “multiple cable” services appear. To do so, select (2) in the
VCR Plus+ SETUP menu from the VCR’s MAIN MENU.
Time/Date Display
Pressing INFO on the remote displays
the time and date on the screen.
VCR Plus+ is a registered trademark of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
