33
RECORDING
VCR Plus+ System Recording
To work, the clock must be set
correctly.
Insert a tape with the safety tab in
place and enough tape to record the
scheduled program.
The TIMER indicator appears on the
front panel display when the VCR is
turned off and a timer recording has
been set. “TIMER” flashes if there is
no tape in the VCR.
“PROGRAMS OVERLAP” appears on
screen if you have entered two
programs that conflict with each
other.
“UNRECOGNIZED NUMBER... PLEASE
RE-ENTER” appears when the VCR
does not recognize the PlusCode
programming system number.
Timer recordings will not be lost in
the event of an extended power
outage.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
_
Press MENU to cancel
3.
Enter the PlusCode
®
programming number shown in
your local television listings.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
12876
Press CLEAR to correct
Press MENU when done
4.
Press MENU to enter the VCR PlusCode system number.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
5.
Indicate how often you want the program to be recorded.
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/20/99 SAT
Tape Speed SLP
Press CLEAR to adjust
Press MENU to save
6.
Change the speed with the SPEED button on the remote or
the program end time with the CLEAR button on the remote
(if necessary).
Changing the end time comes in handy when you are
recording a program, such as a sporting event, that may
exceed the scheduled broadcast time.
PlusCode is a registered trademark of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
