25
Recording a Program
Checking or Clearing Timer Recordings
1.
Press
MENU
on remote to display the
VCR MAIN
MENU
.
2.
Press
2
for
REVIEW PROGRAMS
.
Each entered program is displayed for a few seconds in
sequence. Press
MENU
or
2
to display information
faster.
3.
Press
CLEAR
on the remote when the program you
want to erase appears on the screen.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO
and
VIDEO IN
jacks of the VCR. Recording from the line
input is convenient if you have a satellite receiver or
similar component attached to these jacks.
To timer record from the component connected to the
VCR’s line input, press
INPUT
on the remote to enter
VIDEO IN
instead of the channel number on the TV screen
during timer programming.
Recording While You’re Away (Timer Recording)
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
PROGRAM 1 - ONE TIME
CHANNEL 08 CABLE
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 11/17/95 FRI
TAPE SPEED SLP
PRESS CLEAR TO DELETE
PRESS MENU FOR NEXT PROG
PROGRAM 1 - ONE TIME
CHANNEL VIDEO IN
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
1.
Press
MENU
on the remote to display the
VCR
MAIN MENU
.
2.
Press
3
to display
the CHANNEL SETUP
menu.
3.
Press
4
to display
the CABLE BOX SETUP
menu.
4.
Press
1
when the
CABLE BOX SETUP
menu
appears.
5.
Press two numbers on the remote to enter the
output channel of your cable box. Press
0
before a
single-digit number. (Valid numbers are
01 – 13
.)
Press
CLEAR
on the remote to correct an entry.
If you connected your cable box to the VCR using
the cable box’s
AUDIO/VIDEO OUT
jacks, press
INPUT
on the remote to select the
VIDEO IN
option.
6.
Press
MENU.
A message appears which will time
out, or you can press
MENU
to return to
CHANNEL
SETUP
Menu.
The VCR automatically enters the output channel of
your cable box and
CABLE
in the
TIMER
PROGRAMMING
menu.
Select cable box viewing channel. (Required only if all channels
are received from a cable box.)
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
CHANNEL SETUP
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
3 TUNING MODE: CABLE
4 CABLE BOX SETUP
IS A CABLE BOX BEING
USED WITH THE VCR FOR
ALL CHANNELS?
1 YES, CONTINUE
ENTER THE CHANNEL
NUMBER FOR VIEWING
THE CABLE BOX SIGNAL
--
YOUR VCR WILL NOW
RECEIVE ALL CHANNELS
FROM THE CABLE BOX
ON VCR CH 11
PRESS MENU TO EXIT
