38
OTHER FEATURES
Time Counter
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
For example, if you record a 30-minute program at the beginning
of the tape and you want to go to the end of that program to
begin another recording, you would:
Go-To Search
The Go-T o search feature enables the VCR to quickl y locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. Pr ess ST OP.
2. Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
3. Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to “go to”. Press
CLEAR on the r emote to cor rect an entry.
4. Pr ess FOR WARD to sear ch forward or REVERSE to sear ch
in reverse.
5. Pr ess ST OP to stop Go-T o searching.
TRACKING
Your VCR has automatic tracking which r emoves the str eaks or
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRA CKING buttons to r emove the
streaks or snow. You can also use tracking when you pause a tape
to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the VCR at the same time, or eject the
tape and re-insert it.
Tracking has no effect during recording--only playback.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to 0:00:00
Press SEARCH to exit
Summary of Contents for VR615HF
Page 1: ...video cassette recorder user s guide VR615HF ...
Page 24: ......
Page 36: ......
Page 44: ......