42
OTHER FEATURES
Go-To Search
The Go-T o search feature enables the VCR to quickl y locate a
counter reading anywhere on the tape. When the VCR locates the
counter reading, it will begin playback.
1. Pr ess ST OP.
2. Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
3. Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to “go to”. Press CLEAR
on the remote to cor rect an entry.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to 0:00:00
Press SEARCH to exit
INDEX SEARCH
The VCR has a “VHS Index Search System” that automatically records
an index mark on the tape every time you start a recording. During
playback you can locate the program you want to play by the
number of index marks or by scanning. The VCR will search forward
or reverse from the location you are on the tape.
To Search:
1. Pr ess ST OP.
2. Press SEARCH on the remote until the INDEX SEARCH menu
appears on the TV screen.
3. If you want to search a certain number of index marks, press two
number buttons to enter the number of marks you want to
search. Pr ess CLEAR on the r emote to cor rect an entry.
4. Press FWD on the remote to search forward or REV on the
remote to search in reverse. The VCR will locate your index mark
and begin playback. If you did not enter a specific index number,
the VCR will locate the next index mark and begin playback.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR:
•
A mark too close to your location on the tape.
•
The mark at the beginning of a recorded segment of five
minutes or less.
•
The first index mark on the tape when you start at the beginning
of the tape.
INDEX SEARCH
Enter Index Number
01
Press REV or FWD
Press SEARCH to exit
