Playing a Tape
Using the Playback Features
Go-To Search
The go-to search feature allows you to locate a counter reading on the tape.
1.
Insert the prerecorded tape and press
STOP
.
2.
Press
SEARCH
on the remote twice to display the
GO-TO
SEARCH
menu on the TV screen.
3.
Press number buttons to enter the hour(s) and minute(s)
of the time counter reading you want the VCR to search.
Press
CLEAR
to correct an entry.
4.
Press
FF
on remote or turn the
SHUTTLE DIAL
clockwise
toward
FWD
on the VCR to search forward.
Press
REW
on remote or turn the
SHUTTLE DIAL
counterclockwise toward
REW
on the VCR to search in
reverse.
The time counter is displayed in the upper right corner of
the TV screen during search.
5.
Press
STOP
to stop Go-To Search.
Blank Search
The VCR searches for blank portions of the tape that are more than six seconds in length.
1.
Insert the tape and press
STOP
.
2.
Press
SEARCH
on the remote three times to display the
BLANK SEARCH
menu on the TV screen.
3.
Press
FF
or turn the
SHUTTLE DIAL
clockwise toward
FWD
begin searching for six seconds of blank tape. A
message appears on the screen if a blank area is not
found.
4.
Press
STOP
to stop Blank Search.
Tape Playback: HI-FI/LINEAR/MIX Feature
The VCR records the same audio on both the hi-fi and linear tracks on the tape. The Hi-
Fi stereo sound is recorded on separate left and right stereo channels. Monaural sound is
recorded on the linear track.
To enjoy hi-fi sound, connect your VCR to a stereo television or amplifier/receiver using
the audio/video jacks. The
Tape Playback: HI-FI/LINEAR/MIX
feature lets you select
which audio you play back.
To Select Playback Sound
1
. Press
MENU•PROG
to see the
VCR MAIN MENU
on the
TV screen.
2
. Press
8
to see the
AUDIO
menu on the TV screen.
3
. Press
2
to switch between
HI-FI, LINEAR
, or
MIX
sound.
¥ Select
HI-FI
to play back sound recorded on the hi-fi track
and for normal use.
The
HIFI
indicator is lit in the VCRÕs display panel during
hi-fi playback.
¥ Select
LINEAR
to play back the sound recorded on the
linear monaural track Ð used to playback a second audio
program (
SAP
).
¥ Select
MIX
to play back the sound recorded on both the
linear track and the hi-fi track, sound-on-sound.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REW or FF to go to
0:00:00
Press SEARCH to exit
BLANK SEARCH
Press FF to begin
Searching for blank
section of tape.
Press SEARCH to exit
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language/Langue
8 Audio
0 Exit
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
30