background image

39

VCR MAIN MENU

1 VCR Plus+ 
2 Timer Recordings

TIMER RECORDINGS

1 Create a New Program
2 Review Existing Progs.

Recording a Program

Recording While You’re Away

Program 1 (One Time)

Channel    08  
Start Time 02:10 PM
End Time   03:35 PM
Start Date 11/18/96 Mon
Tape Speed SLP
Press DISPLAY to edit
Press CLEAR to delete
Press MENU for next prog

Program 1 (One Time)

Channel    VIDEO1
Start Time --:-- 
End Time   --:--
Start Date --/--/--
Tape Speed SLP

Press CLEAR to correct
Press MENU to exit

Check, Edit, or Clear a VCR Plus+ or Timer Recording

Timer programs are stored in permanent memory and cannot be cleared during a power
outage.  The program can only be cleared as described in this section.

1.

Press

MENU•PROG

on remote to display 

VCR MAIN

MENU

on TV screen.

2.

Press 

2

to display the 

TIMER RECORDINGS

menu.

3.

Press

for

Review Existing Progs. 

feature. 

The first program in the timer is displayed.

¥

Check the Programs:

Press 

MENU•PROG

to display

information for the next program.

¥

Edit the Program:

Press 

DISPLAY

to edit the program.

The frequency menu appears first so you can change
how often you want to record the program.

Press a number button to select the type of program
you want to record.

Edit the rest of the program using the 

CLEAR 

and

number buttons.

¥

Clear the Program:

Press 

CLEAR 

when the program

appears.

Timer Recording From the VCR’s Line Input

The line input refers to the signal coming from the 

AUDIO

and

VIDEO IN

jacks of the

VCR.  Recording from the line input is convenient if you have a satellite receiver or
similar component attached to these jacks.  To timer record from the component
connected to the VCRÕs line input:

Press 

INPUT

to enter the channel number when you program

the timer.  Enter 

VIDEO1 

to record from the jacks on the back

of the VCR or 

VIDEO2 

to record from the jacks on the front

of the VCR

.

Program 2 (One Time)

Channel    08  
Start Time 2:10 PM
End Time   03:35 PM
Start Date 11/18/96 Mon
Tape Speed SLP

Press CLEAR to correct
Press MENU to save

How often should this
program record?

1 One Time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (Once per week)

0 Cancel

Summary of Contents for VR689HF





























































Reviews: