(7) Device Setup
It stores settings of the device into SD Card.
It allows setting up Impact Level, resolution, audio storage, etc.
[Impact Level]
If the product receives impact value larger than the impact level setting,
it stores data automatically.
If you want to record the image data less frequently, select higher value
of G.
It is possible to setup impact level by each X, Y, Z axes. Impact level is
saved when the OK button is clicked on after moving the bar to the
desired number.
X-axis => vehicle’s front and rear direction
Y-axis => vehicle’s left and right direction
Z-axis => vehicle’s upper and lower direction
[Voice Recording]
check box.
S
o
ft
w
ar
e
g
u
id
e
