-17-
1
2
3
4
1
2
A
3
5
4
6
7
NEEDLE TRHREADER (AUTOMATIC)
1. Lower the presser foot.
2. Set needle in up position.
3. Lower the threader slowly and
draw thread through thread
guide (A) and pull toward the
right.
4. Lower the lever as far as it
will go, The threader will turn
and the hook pin will go
through the needle eye.
5. Draw thread through the
lower guide.
6. Hold thread loosely and
release the lever. Hook will
turn and pass thread through
needle eye while making a loop
7. Pull thread out about
10 inches from needle eye.
Note: The needle threader is
used forneedle sizes 80,90 and 100.
CAUTION: To prevent accidents.
Do not lower the threader lever while machine is operating.
DRAWING UP THE BOBBIN THREAD
1. Raise the presser foot.
2. Hold the upper thread loosely
and press needle up/down
button. The hand wheel
will turn one complete turn.
3. Pull upper thread lightly.
Bobbin thread will come up
in a loop.
4. Pull both upper and bobbin
threads about 10 inches and
under the presser foot.
E
LIS
H
N
G
