-19-
1
2
3
4
5
A
B
A
1
2
3
4
E
LIS
H
N
G
REVERSE STITCHING
Reverse stitching is used to reinforce ends of seams.
1. Place the fabric in position where back
stitching is to be made and lower the
presser foot.
2. Press reverse stitch button and sew 4-5
Stitches. (With foot control, press
pedal while holding in reverse stitch
button.)
3. Press start button and resume sewing.
(Using foot control, release reverse
stitch button and press foot contol to
sew forwards).
4.When you reach the end of seam,
press reversestitch button and sew
4-5 reverse stitches.
TURNING CORNERS
1. Stop the machine when you reach
a corner.
2. Lower needle into the fabric. To lower
the needle you can either use the
needle up/down button or turn the
handwheel toward you.
3. Raise the presser foot.
4. Use the needle as pivot and turn fabric.
5. Lower the presser foot and resume
sewing.
SEWING HEAVY FABRIC
When sewing heavy fabrics, the toe end of
presser foot tends to lift up and sewing can
not be started smoothly. In such case, place
a piece of cardboard or fabric of same thickness
under the heel end of the presser foot.
The presser foot lifter can be raised 1 step
higher for placing heavy materials under
the presser foot easily.
SEWING OVER OVERLAPPED AREAS
Guide the fabric with your hand when
sewing over overlapped areas
A: Fabric B: Thick paper or fabric
