4. never operate the appliance with any air openings blocked.
keep ventilation openings of the sewing machine and foot control-
ler free from the accumulation of lint, dust, and loose cloth.
5. never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
8. to disconnect, turn all controls to the off (“O”) position,
then remove plug from outlet.
9. Do not unplug by pulling on cord. to unplug, grasp the plug,
not the cord.
DANgER!
1. always unplug before bulb replacement. replace the bulb with
same type rated at max. 15 watts.
2. Do not reach for an appliance that has fallen into water.
unplug immediately.
3. Do not place or store appliance where it can fall or be pulled into a
tub or sink. Do not place or drop into water or other liquid.
WARNiNg!
1. keep fingers away from all moving parts. special care is required
around the sewing machine needle.
2. always use proper needle plate. the wrong plate can cause the
needle to break.
3. Do not use bent needles.
4. Do not pull or push fabric while stitching. it may deflect the needle
causing it to break.
5. unplug the foot controller when making any adjustments in the
needle area, such as threading needle, changing needle, threading
bobbin, or changing presser foot, etc.
6. always unplug sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.
7. never operate on a soft surface such as a bed or couch where the
air openings may be blocked
SAvE ThESE iNSTRUCTiONS
4
E
N
g
Li
S
h
