ENGLISH
RCF FORUM 6000 system - DMS 6410X
Microphone console with removable gooseneck
This document is an addendum to the RCF FORUM 6000 system user
manual.
About this product installation and use, please refer to the description of the
standard model DMS 6410 (on the FORUM 6000 user manual), which
differs in the gooseneck type only.
Press the PUSH button of the console (5-pin) XLR5
socket to remove the gooseneck with mic. capsule.
Note: do not dirty the XLR5 socket (when the gooseneck is not
inserted). Keep the mic. console in a dry and clean place.
Specifications
Microphone type
electret, cardioid, with gooseneck, removable with 5-pin XLR5 plug.
Frequency response (-3 dB)
200 Hz ÷ 12 kHz
S/N ratio (to MAIN OUT)
≥ 60 dBA
Internal limiter
up to + 32dB over 100% level
MIC AUTO-OFF signal threshold
-20 dB
Voltage; current
48 V dc; nominal < 20 mA, max. 50 mA (internal lspk. : max. volume)
Internal amplifier power
1 W (THD <1%)
Included connection cable
10 pole special cable with RJ connectors, 2.5 m long
JACK OUTPUTS
Max. power (headphones mode)
60 mW on 16 Ω (<0.5% THD)
Output level (recording mode)
nominal: - 4 dBu (0.2% THD), max. + 5 dBu
Frequency response (-3 dB)
170 Hz ÷ 16 kHz
