8
ENGLISH
WARNING:
Make sure that speakers are installed in a stable and secure way in
order to avoid any conditions that may be dangerous for persons or structures.
Ensure the support surface (walls, ceilings, etc.) has the necessary mechanical
characteristics to support the speaker weight.
Before installing speakers, carefully check all components to be used and make
sure there is no damage, deformation, corrosion and/or missing or damaged parts
that could reduce the safety of the installation.
-
Connect the speaker as described in the previous manual section.
-
Install the speaker through the 6 mm holes present on its mounting bracket.
-
Aim the speaker to the listening area and fix its position by tightening the two
bolts of its mounting bracket.
INSTALLATION
SPECIFICATIONS
Input:
Nominal power:
Input impedance:
Transducer:
Frequency response:
Sensitivity:
Max. sound pressure level:
Coverage angle:
Body material:
Grille material:
IP code:
Colour:
Connector:
Dimensions:
Net weight:
100 V (/ 70 V) constant voltage
10 W – 5 W – 2.5 W (100 V)
1 kΩ – 2 kΩ – 4 kΩ
4” dual-cone
180 Hz ÷ 16 kHz
91 dB (1 W, 1 m), 79 dB (1 W, 4m)
101 dB (10 W, 1 m), 89 dB (10 W, 4 m)
18
0° (1 kHz)
ABS
a
luminium
IP 55
light grey
RAL 7035
ceramic screw terminal
ø 137 mm x 2
00
mm
1.3 kg
