ENGLISH
RCF S.p.A. would like to thank you for having purchased this product,
which has been designed to guarantee reliability and high performance.
MQ 90S
is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the
parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines
(100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where “satellite” loudspeakers
(for mid / high frequencies) are already present.
MQ 90S
belongs to
RCF Monitor Q series
.
APPLICATIONS
One or more subwoofers can be added to a hall / room (where “satellite”
loudspeakers are) for low frequency reinforcement, in order to make the
music more pleasant.
CONNECTIONS
WARNING:
loudspeaker connections should be only made by qualified and
experienced personnel having the technical know-how or sufficient specific
instructions to ensure that connections are made correctly in order to prevent
any electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the
amplifier is switched on.
Before turning the system on, check all connections and make sure there are
no accidental short circuits.
The entire sound system shall be designed and installed in compliance with
the current local laws and regulations regarding electrical systems.
SET THE POWER FOR 100 / 70 V CONSTANT VOLTAGE LINES
Set the power (by using a screwdriver) according to the
loudspeaker line voltage (100 o 70 V):
60 W – 30 W – 15 W – 7.5 W [100 V]
30 W – 15 W – 7.5 W – 3.75 W [ 70 V]
278
75
MADE IN ITALY
7.5W
15W
7.5W
100V 70V
3.75W
OFF
16
Ω
60W
30W
15W
30W
7.5W
OFF
16
Ω
MADE IN ITALY
MQ
60W
30W
15W
7.5W
100V 70V
3.75W
15W
30W
