31
ENGLISH
AUDIO SET > OUTPUTS SUBMENU
Audio output parameter settings.
Choose:
- Main Unit
, to set the four output channels (out 1, 2, 3, 4) and the AUX OUT
34
;
- Boards
(SLAVE units): after selecting a board, its output parameters (OUT 1, 2, 3, 4)
can be edited.
Select an output to open an editable signal processing parameter list.
LEVEL
It adjusts the audio output level.
5-BAND EQ
The first band
BAND I LS
is a
low-shelf
filter that increases or decreases the level of all
frequencies below the selected one.
The second band
BAND II PK
, the third
BAND III PK
and the fourth
BAND IV PK
are
parametric equalizers that allow to adjust the level at the centre frequency and specify
the Q factor.
The fifth band
BAND V LS
is a
hi-shelf
filter that increases or decreases the level of all
frequencies above the selected one.
PARAMETERS
BAND I LS
FREQ
Frequency setting.
GAIN
Gain setting (for frequencies below the selected one).
BAND II PK
FREQ
Centre frequency setting.
GAIN
Gain setting.
Q
Q factor: a higher value corresponds to a narrower
bandwidth.
BAND III PK
Like BAND II PK
BAND IV PK
Like BAND II PK
BAND V HS
FREQ
Frequency setting.
GAIN
Gain setting (for frequencies above the selected one).
BYPASS EQ
Select either ON (equalizer bypassed) or OFF (equalizer inserted).
AUDIO SET >
OUTPUTS SUBMENU
Summary of Contents for MX 9502
Page 2: ......
