42
ENGLISH
GPO TRIG:
assignment of a GPO (chosen among either the main unit ones MAIN UNIT
GPO or BOARDS GPO) to a GPI.
DELAY:
it allows to delay actions related to GPI activation and release.
It opens a further submenu:
- ACTIVATION TIME:
delay time setting of the start of the function assigned to the GPI
after its activation.
- RELEASE TIME:
delay time setting of the end of the function assigned to the GPI after
its release.
- OVERRIDE:
it is possible to cancel the function assigned to a logic input if either a
main unit GPI (MAIN UNIT GPI) or a slave board GPI (BOARDS GPI) is here selected and
then activated.
Select
VOX
to enter a 6-option submenu:
SET PRIO:
VOX priority level setting (lower number: higher priority).
SEL AREA:
selection of the area assigned to the VOX function among a zone (
ZONE
submenu), a group (
GROUP
), all system zones (
ALL
), no zone (
NONE
).
GPO TRIG:
assignment of a logic output (GPO) to the VOX function.
DELAY:
it allows to delay actions related to the VOX function activation and release.
It opens a further submenu:
- ACTIVATION TIME:
setting of the delay time before opening the audio input from the
VOX function activation.
- RELEASE TIME:
setting of the delay time before muting the audio input from the VOX
function release.
- OVERRIDE:
it is possible to cancel the VOX function if a paging microphone button is
pressed (selected in the
MAIN/EXT BUTT
submenu), a main unit logic input is activated
(
MAIN UNIT GPI
), a slave board logic input is activated (
BOARDS GPI
submenu).
GAIN-PHANT:
to enter a further 2-option submenu.
- GAIN:
VOX function threshold setting from 0 (low threshold) to 7 (high threshold).
- PHANTOM:
it turns
On /
Off
the Phantom power on the MAIN IN input.
ENABLED:
it enables
(
On
) / disables (
Off
) the VOX function.
Summary of Contents for MX 9502
Page 2: ......
