background image

4

ENGLISH

IMPORTANT

Before connecting and using this product, please read this instruction manual carefully and 
keep it on hand for future reference.
The manual is to be considered an integral part of this product and must accompany it 
when it changes ownership as a reference for correct installation and use as well as for the 
safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of 
this product.

WARNING: 

To prevent the risk of fire or electric shock, never expose this product to rain 

or humidity.

SAFETY PRECAUTIONS
1.

 

All the precautions,

 in particular the safety ones, 

must be read with special 

attention,

 as they provide important information.

2. POWER SUPPLY FROM MAINS

a.  The mains voltage is sufficiently high to involve a risk of electrocution; therefore, never 

install or connect this product when its power cord is plugged in.

b.  Before powering up, make sure that all the connections have been made correctly and 

the voltage of your mains corresponds to 

the voltage shown on the rating plate 

on the unit

, if not, please contact your RCF dealer.

c.  The metallic parts of the unit are earthed by means of the power cord. 

 

An apparatus with CLASS I construction shall be connected to a mains socket outlet 
with a protective earthing connection.

d.  Protect the power cord from damage; make sure it is positioned in a way that it cannot 

be stepped on or crushed by objects.

e.  To prevent the risk of electric shock, 

never open the product

: there are no parts 

inside that the user needs to access.

f.  The mains plug is used as the disconnect device and it shall remain readily operable.

3.

 Make sure that no objects or liquids can get into this product, as this may cause a short 

circuit. This apparatus shall not be exposed to dripping or splashing. No objects filled with 
liquid, such as vases, shall be placed on this apparatus. No naked sources (such as lighted 
candles) should be placed on this apparatus.

4.

 Never attempt to carry out any operations, modifications or repairs that are not expressly 

described in this manual. 
Contact your authorized service centre or qualified personnel should any of the 
following occur:

 

-

The product does not function (or functions in an anomalous way).

 

-

The power supply cord has been damaged.

 

-

Objects or liquids have got in the unit.

 

-

The product has been subject to a heavy impact.

5. 

If this product is not used for a long period, disconnect the power cord.

6. 

If this product begins emitting any strange odours or smoke, 

switch it off immediately 

and disconnect the power supply cord.

7.

 The terminals marked with the symbol 

 are HAZARDOUS LIVE and their connection 

is to be made by an INSTRUCTED PERSON or the use of ready-made cables is required.

8. 

Do not connect this product to any equipment or accessories not foreseen.

For suspended installation, only use the dedicated anchoring points and do not try to hang 
this product by using elements that are unsuitable or not specific for this purpose.

IMPORTANT

WARNING

SAFETY 

PRECAUTIONS

Summary of Contents for UP 4240

















Reviews: