20
ENGLISH
SPECIFICATIONS
ZM 2124
ZM 2100
INTERNAL AMPLIFIER TYPE
Analogue
(no internal amplifier)
INTERNAL AMPLIFIER MAX. OUTPUT POWER
240 W
(no internal amplifier)
INTERNAL AMPLIFIER OUTPUT VOLTAGE
100 – 70 V (direct), 100 V (6 zones)
(no internal amplifier)
FREQUENCY RESPONSE (+1 / –3 dB)
MIC: 60 Hz ÷ 15 kHz
AUX: 50 Hz ÷ 20 kHz
DISTORTION (at max. power)
< 1%
(no internal amplifier)
MIC input sensitivity
1.5 mV (– 54 dBu)
MIC input signal / noise ratio
> 60 dB
MIC input impedance
600 Ω (balanced)
LINE input sensitivity
200 mV (– 12 dBu)
LINE input signal / noise ratio
> 70 dB
LINE input impedance
600 Ω (balanced)
AUX input sensitivity
200 mV (– 12 dBu)
AUX input signal / noise ratio
> 75 dB
AUX input impedance
10 kΩ (unbalanced)
INPUT 1÷4, AUX BASS tone control
100 Hz ± 10 dB
INPUT 1÷4, AUX TREBLE tone control
10 kHz ± 10 dB
EMERGENCY input sensitivity
100 mV (balanced audio signal), 100 V line
EMERGENCY input s/n ratio
> 70 dB
EMERGENCY input impedance
600 Ω (100 mV balanced audio signal)
PAGING (RJ 45) input sensitivity
1 V (+ 2 dBu)
PRE OUT max. output level
1 V
MOH signal max. output level
1 V (+ 2 dBm @ 600 Ω, balanced)
MOH amplified output power (8 Ω)
1 W (on a 8 Ω load)
AMPLIFIER 100 V input max. power
240 W
POWER SUPPLY
115 V / 230 V ac, 24 V
MAX. POWER CONSUMPTION
720 W
100 W
OPERATING TEMPERATURE
– 10 ÷ + 45 °C (+ 14 ÷ + 113 °F)
DIMENSIONS (w, h, d)
430 mm, 133 mm, 365 mm (19” rack, 3 units)
NET WEIGHT
16.1 kg
8.2 kg
