Product Mounting Accessories Guide
Used in a narrow head jamb situation or for center-hung doors.
Any place where there is insufficient frame depth to mount the lock.
The Early Warning uses the same angle bracket as the RCI
standard 8310.
Available in several different sizes and finishes.
Required wherever there is insufficient space on the frame header to
mount the lock. The lock mounts to the underside of the “L” bracket
and the “L” bracket then gets mounted to the doorframe.
Available in several different sizes and finishes.
Used to provide extra mounting space in a hollow metal or wood
frame where the door stop of the frame is not thick enough to allow
a lock to be installed.
The Early Warning uses the same filler bars as the RCI
standard 8310.
Available in several different widths.
For use when an obstruction in the door prevents the installation of
the armature plate at a proper height. If the armature plate needs
to be lowered then a spacer bar can be used to lower the lock from
the frame.
Available in several different thickness.
For use with doors that do not permit the armature plate to be
mounted low enough to meet the magnet surface. Eg: Some
aluminum framed commercial glass doors. The armature holder can
be mounted to whatever frame is available and the armature plate in
turn mounted to the holder.
Available in both flat (shown) and pocket styles.
Angle Bracket
“L” Bracket
Filler Bars
Spacer Bars
Armature Holder
PART
USAGE
EXAMPLE
EW8310 Early Warning Electromagnetic Lock
Installation Instructions
(Continued)
7
Accessories may impact holding force.
(Separate installation instructions provided with accessories.)