RCI Web Server User’s Manual
2
The Power Input and the IP Reset are located on the side of the enclosure underneath the text “ACU
WEB SERVER” as illustrated in the following drawing:
2.2 Network Settings
The PC or other web-enabled device and the web server must be properly configured to exist in the
same subnet in order to communicate with each other. Ask your system administrator for the subnet
mask and a unique IP address, and then configure the web server to that subnet and IP address
before connecting it to your network. Specifics on what IP addresses exist within any given subnet
and/or how to configure a particular device is outside the focus of this document.
All web servers are factory configured to have an IP address or 192.168.1.1 and a subnet mask of
255.255.0.0. Changes to the IP address or subnet mask can be made from within the configuration
interface. Setting the IP address of the target device to 192.168.1.2 with a subnet mask of
255.255.255.0 will usually allow a quick connection to the web server.
Summary of Contents for FP-SER-ETH-SERVR2
Page 2: ......